ADG1206YRUZ

95ns, 100ns 200Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG1206 28 Pins 200pA 15V 28-TSSOP (0.173, 4.40mm Width)

Manufacturer: Analog Devices Inc.
Nocochips NO: 84-ADG1206YRUZ
Package: 28-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 662
Description: 95ns, 100ns 200Ohm DUAL Analog Switches BREAK-BEFORE-MAKE ADG1206 28 Pins 200pA 15V 28-TSSOP (0.173, 4.40mm Width)(Kg)

Details

Tags

Parameters
RoHS Status	ROHS3 Compliant
Lead Free	Contains Lead
Factory Lead Time	1 Week
Lifecycle Status	PRODUCTION (Last Updated: 2 weeks ago)
Contact Plating	Tin
Mounting Type	Surface Mount
Package / Case	28-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	28
Manufacturer Package Identifier	RU-28
Operating Temperature	-40°C~125°C TA
Packaging	Tube
JESD-609 Code	e3
Pbfree Code	no
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	28
Termination	SMD/SMT
ECCN Code	EAR99
Resistance	120Ohm
Subcategory	Multiplexer or Switches
Max Power Dissipation	6.3mW
Technology	CMOS
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Number of Functions	1
Supply Voltage	15V
Terminal Pitch	0.65mm
Time@Peak Reflow Temperature-Max (s)	30
Base Part Number	ADG1206
Pin Count	28
Operating Supply Voltage	12V
Number of Channels	16
Interface	Parallel
Number of Circuits	1
Max Supply Voltage	16.5V
Min Supply Voltage	5V
Analog IC - Other Type	SINGLE-ENDED MULTIPLEXER
Operating Supply Current	420μA
Nominal Supply Current	260μA
Power Dissipation	6.3mW
Voltage - Supply, Single/Dual (±)	5V~16.5V ±5V~16.5V
Bandwidth	280MHz
Supply Current-Max (Isup)	0.42mA
Neg Supply Voltage-Nom (Vsup)	-15V
Turn-Off Delay Time	85 ns
Max Dual Supply Voltage	16.5V
On-State Resistance (Max)	200Ohm
Min Dual Supply Voltage	5V
Dual Supply Voltage	15V
Multiplexer/Demultiplexer Circuit	16:1
Off-state Isolation-Nom	85 dB
Current - Leakage (IS(off)) (Max)	200pA
Channel Capacitance (CS(off), CD(off))	2pF 12pF
On-state Resistance Match-Nom	3.5Ohm
Switch Time (Ton, Toff) (Max)	95ns, 100ns
Charge Injection	0.5pC
Channel-to-Channel Matching (ΔRon)	3.5 Ω
Crosstalk	-85dB @ 1MHz
Switching	BREAK-BEFORE-MAKE
Signal Current-Max	0.03A
Height	1.05mm
Length	9.7mm
Width	4.4mm
Radiation Hardening	No
REACH SVHC	No SVHC

ADG1206YRUZ Overview

The electronic part can be shipped overseas conveniently because it is packaged in 28-TSSOP (0.173, 4.40mm Width). In order to provide high reliability, an advanced packaging method Tube is used. Surface Mount is where this multiplexer is located. Multiplexer and demultiplexer circuits have a number 16:1. Operational temperature extended around -40°C~125°C TA. Total terminations are 28. Due to its 16 channels, the electrical component produces high-quality output. With a 15V voltage supply, the electrical component should be turned on and run. An injection of 28 pins is performed into the body of the electrical component. There are 1 circuits in this switch device. Try searching for ADG1206 variants of the analog switch ic. As far as internal resistance is concerned, it has 120Ohm. To find out what the functions of 28 pins are, please refer to their datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. A voltage higher than 16.5V should not normally be supplied to the switches. 5V is the lowest voltage that should be fed to the electronic electronic part. The switch device would be able to operate with 420μA current. Dual supply volatge is feasible for this multiplexer. But it should not go beyond 16.5V. For dual power supplies, a voltage of at least 5V should be attached. Integrated with an analog IC SINGLE-ENDED MULTIPLEXER. The electronic component can function from 12V. The data can be transferred over a wide range of bandwidths, called 280MHz bandwidths.