ADP1822ARQZ-R7
| Parameters | |
|---|---|
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 4.675V |
| Output Type | Transistor Driver |
| Max Output Current | 20A |
| Operating Supply Voltage | 5V |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 10μA |
| Nominal Supply Current | 2mA |
| Output Configuration | Positive |
| Output Current | 20A |
| Voltage - Supply (Vcc/Vdd) | 3.7V~5.5V |
| Quiescent Current | 1mA |
| Control Features | Enable, Frequency Control, Margining, Power Good, Soft Start, Tracking |
| Max Output Voltage | 4.67V |
| Topology | Buck |
| Min Input Voltage | 3.7V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 310kHz 570kHz |
| Max Input Voltage | 5.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 600mV |
| Switcher Configuration | PUSH-PULL |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.635mm |
| Frequency | 1.2MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADP1822 |
ADP1822ARQZ-R7 Overview
With its 24-SSOP (0.154, 3.90mm Width) package, the switching controller fits the needs of most applications. The dc motor controller is adquate to generate for 1 outputs. Packaging for the pmic consists of Tape & Reel (TR) solid enclosures. With this function, you can deal with Transistor Driver dc switching's outputs (s). This dc control has a supply voltage and operating voltage of 3.7V~5.5V. Qualified to work in a -40°C~85°C TA dc switcher. Using this switching controller, it is possible to switch at 310kHz 570kHz. Surface Mount makes it suitable for general dc dc regulator. To provide efficient switching control, Enable, Frequency Control, Margining, Power Good, Soft Start, Tracking is included in the dcdc regulator. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. switching converters terminal (s) are designed to be at DUAL. Various 24 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. DC switcher's voltage input is 5V. You can find other relevant dc to dc converter ics by searching "ADP1822". In total, switching converter has 24 pins. Particularly, switching converter is a type of Switching Regulator or Controllers. Statistically, the DC regulator outputs 4.675V voltage. If you are starting a new project, you should note the dc dc regulator's typical output current is 20A. The Surface Mount makes DC switcher suitable for most applications and prototypes. A frequency of 1.2MHz is used by the switching controller. If the user wishes to run the voltage regulator dc to dc in a circuit safely and reliably, they should apply 5V. When the dc switching is dormant, it uses 1mA. The dc switcher's maximum input voltage is 5.5V, so users must limit the voltage accordingly. Switching controller is necessary to have a supply voltage of 3.7V. Input current cannot exceed 20A with this dc switcher. The datasheet indicates that the switching converter can output 4.67V volts at its maximum. A supply current of 10μA is used to power it. At least 600mV voltage is output by the voltage controller. The nominal supply current for this the controllers dc is 2mA.
ADP1822ARQZ-R7 Features
Transistor Driver Outputs
Switching Frequency: 310kHz 570kHz
Enable, Frequency Control, Margining, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION
Frequency: 1.2MHz
ADP1822ARQZ-R7 Applications
There are a lot of Analog Devices Inc. ADP1822ARQZ-R7 DC to DC converter applications.
- Correction machines
- Surface processing equipment
- Post equipment
- Scientific testing
- Geothermal power
- Access control systems
- Hydrogen power
- Remotely powered electric motors
- Low output voltage switching power supply circuits
- Network technology
