ADP1875ARQZ-1.0-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Additional Feature | ADJUSTABLE OUTPUT VOLTAGES AVAILABLE AS LOW AS 0.6V |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.64mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADP1875 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 600mV |
| Output Type | Transistor Driver |
| Max Output Current | 25A |
| Operating Supply Voltage | 20V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 1.1μA |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 3.25V~20V |
| Control Features | Enable, Power Good, Soft Start, Tracking |
| Max Output Voltage | 18V |
| Topology | Buck |
| Min Input Voltage | 2.95V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 1MHz |
| Max Input Voltage | 20V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 600mV |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 1MHz |
| Max Duty Cycle | 45 % |
| Clock Sync | No |
| Length | 4.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADP1875ARQZ-1.0-R7 Overview
Capsuled in the 16-SSOP (0.154, 3.90mm Width) package, the switching controller can be used for a wide range of applications. This dc motor controller can be used to generate outputs with 1 numbers. A solid enclosure of Tape & Reel (TR) surrounds pmic. A total of Transistor Driver dc switching's outputs can be handled by it. dc controls with 3.25V~20V voltage are supplied and operated. Workable in an dc switcher where -40°C~125°C TJ is the -40°C~125°C TJrm. In this switching controller, the switch can be set to 1MHz. The Surface Mount value makes it suitable for general dc dc regulator. In order to control switching efficiently, the dcdc regulator features Enable, Power Good, Soft Start, Tracking. SWITCHING CONTROLLER analog IC connects the switch converters. switching converters terminal (s) are designed to be at DUAL. Various 16 terminations. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 12V is input. Other relevant dc to dc converter ics can be found by searching "ADP1875". There are a total of 16 pins on switching converter. Switching converter is a special type of Switching Regulator or Controllers. Test statistics indicate DC regulator outputs 600mV voltage. Power-up and power-down reliability is ensured voltage regulator dc to dc by setting the maximum duty cycle to 45 %. Having a Surface Mount makes DC switcher suitable for most application and prototype designs. There is a maximum frequency of 1MHz for this dc regulators. The value of DC to DC voltage regulator is set to ADJUSTABLE OUTPUT VOLTAGES AVAILABLE AS LOW AS 0.6V in order to better satisfy the requirement. In order to run the voltage regulator dc to dc safely and reliably, users are advised to apply 20V. The maximum input voltage of the dc switcher is 20V, so users need to limit the voltage accordingly. A voltage of 2.95V must be present in the supply. There will be 25A current output from the dc switcher above 25A. As per its datasheet, the switching converter has a maximum output of 18V volts. It runs on a supply current of 1.1μA. voltage controllers with a minimum voltage output of 600mV cannot operate.
ADP1875ARQZ-1.0-R7 Features
Transistor Driver Outputs
Switching Frequency: 1MHz
Enable, Power Good, Soft Start, Tracking
PULSE WIDTH MODULATION
Max Duty Cycle: 45 %
ADJUSTABLE OUTPUT VOLTAGES AVAILABLE AS LOW AS 0.6V
ADP1875ARQZ-1.0-R7 Applications
There are a lot of Analog Devices Inc. ADP1875ARQZ-1.0-R7 DC to DC converter applications.
- Packaging
- Handheld GPS
- Precision electronic equipment
- Electric heating, lighting
- Lathes
- Network technology
- Industrial robots
- Photovoltaic power
- Power supplies of electronic gadgets
- Domestic water pumps
