ADP5061ACBZ-4-R7
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-WFBGA, WLCSP |
| Number of Pins | 20 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e1 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Power Management Circuits |
| Technology | DMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADP5061 |
| Pin Count | 20 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Number of Channels | 1 |
| Interface | I2C, USB |
| Max Supply Voltage | 6.7V |
| Min Supply Voltage | 4V |
| Analog IC - Other Type | POWER SUPPLY MANAGEMENT CIRCUIT |
| Output Current | 2.1A |
| Adjustable Threshold | YES |
| Nominal Input Voltage | 6.7V |
| Battery Chemistry | Lithium-Ion |
| Number of Cells | 1 |
| Current - Charging | Constant - Programmable |
| Charge Current - Max | 1.3A |
| Battery Pack Voltage | 4.3V |
| Height Seated (Max) | 0.66mm |
| Length | 2.595mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADP5061ACBZ-4-R7 Overview
There is a package for Cut Tape (CT) in which it can be found.Located in package 20-WFBGA, WLCSP, it can be found there.There is a mounting type Surface Mount specified for the device.The best way to adjust the temperature is to set it to -40°C~125°C TJ.The device relies on an analog IC called POWER SUPPLY MANAGEMENT CIRCUIT to operate.To charge the device, you need Constant - Programmable current.A list of related parts can be found by searching for the base part number ADP5061.As a whole, it contains 20 terminations.In the battery pack, the voltage is 4.3V.Due to the 20 pins on it, it is a very simple circuit.With maximum charging current, its rating is 1.3A.For the product to work properly, 20 pins must be connected in order to make it work.Currently, there are 1 channels available.In theory, it should be able to run on a battery that has a voltage of 5VV.In order for the device to operate properly, the supply voltage should not exceed 6.7V.The operation is carried out with an output current of 2.1A.As far as this device is concerned, it belongs to the subcategory Power Management Circuits.This circuit can function at a low supply voltage, such as 4VV.It is mounted in the same way as Surface Mount.Regarding the power supply for the part, it is set to 5V.
ADP5061ACBZ-4-R7 Features
Battery pack voltage of 4.3V
1 channels
Power Management Circuits subcategory
20-WFBGA, WLCSP package
ADP5061ACBZ-4-R7 Applications
There are a lot of Analog Devices Inc. ADP5061ACBZ-4-R7 Battery Chargers ICs applications.
- GPS portable devices
- Electricity bank
- Smart power strips
- Electronic dictionary
- Pallet jacks
- Various chargers
- Conventional charge
- Electric tour bus
- Electric boat
- Crosswalk marker lights
