ADSP-2101BPZ-100
| Parameters | |
|---|---|
| Lifecycle Status | OBSOLETE (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 68-LCC (J-Lead) |
| Number of Pins | 68 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | ADSP-21xx |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 5 (48 Hours) |
| Number of Terminations | 68 |
| Type | Fixed Point |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 25MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADSP-2101 |
| Pin Count | 68 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | Synchronous Serial Port (SSP) |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| RAM Size | 3kB |
| Memory Type | RAM, ROM |
| Number of Bits | 16 |
| Supply Current-Max | 38mA |
| Bit Size | 16 |
| Data Bus Width | 16b |
| Number of Timers/Counters | 1 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| Integrated Cache | NO |
| Voltage - I/O | 5.00V |
| Number of Serial I/Os | 2 |
| Number of External Interrupts | 1 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | External |
| On Chip Data RAM | 6kB |
| Height Seated (Max) | 4.45mm |
| Length | 24.18mm |
| Width | 24.18mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADSP-2101BPZ-100 Overview
It is a type of electronic component available in package 68-LCC (J-Lead).Packaging way Tube is provided.Fixed Point's wide range of applications makes it ideal for a wide variety of applications.It is mounted in the way of Surface Mount.If it is operating at the temperature of -40°C~85°C TA, then it will be operating normally.The digital voltage range of 5.00V refers to the voltage that can be input or output.Digital signal processors such as this one are included in the ADSP-21xx series.In terms of its uses, it has 68 terminations.The voltage supplied by 5V is used to operate it.Pins are located on the 68 component.An overview of its configuration can be found in the section on 68 pins.With its base part number of ADSP-2101, many related parts can be identified.Specifically, the device is designed to operate at a frequency of 25MHz.A Surface Mount mounting method is used for its mounting.According to its specific characteristics, this device is classified in the subcategory Digital Signal Processors.This device requires a minimum voltage of 4.5V.The maximum voltage supplied to this device amounts to 5.5V.In order for it to operate, 5V is the supply voltage.5V electric power supplies the facility.External events are tracked and measured with 1 timers/counters.A RAM, ROM memory type is used.A source external to the system causes 1 interrupts.In the device, 16 information is stored.For data communication between devices, 2 serial I/Os are used.
ADSP-2101BPZ-100 Features
Supplied in the 68-LCC (J-Lead) package
Operating supply voltage of 5V
1 timers/counters
1 external interrupts
ADSP-2101BPZ-100 Applications
There are a lot of Analog Devices Inc. ADSP-2101BPZ-100 DSP applications.
- Medical imaging
- Smart phones
- Seismology
- Real-time effects
- House construction
- Infrared
- Smart camera
- Speech processing
- Remote sensing image processing technology
- Fourier transform
