ADSP-21061LASZ-176
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 240-BFQFP Exposed Pad |
| Number of Pins | 240 |
| Operating Temperature | -40°C~85°C TC |
| Packaging | Tray |
| Series | SHARC® |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 240 |
| Type | Floating Point |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 44MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADSP-21061 |
| Pin Count | 240 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Interface | Synchronous Serial Port (SSP) |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| RAM Size | 128kB |
| Supply Current-Max | 535mA |
| Bit Size | 32 |
| Data Bus Width | 32b |
| Number of Timers/Counters | 1 |
| Address Bus Width | 32 |
| Core Architecture | SHARC |
| Boundary Scan | YES |
| Low Power Mode | NO |
| RAM (words) | 32768 |
| Voltage - I/O | 3.30V |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | External |
| Length | 32mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADSP-21061LASZ-176 Overview
In the 240-BFQFP Exposed Pad package, it is a type of electronic component.Tray is the packaging method provided.As a member of Floating Point, it is ideally suitable for a wide range of applications.The mounting is carried out in the direction of Surface Mount.It is essential that -40°C~85°C TC is kept at a temperature that ensures proper operation of the machine.3.30V refers to the range of analog voltages that can be input or output.This digital signal processor is included into the SHARC? series.For its use, it has 240 terminations.It operates with the supply voltage of 3.3V.Pins are available on the 240 component.An overview of its configuration can be found in the section on 240 pins.With its base part number ADSP-21061, it is possible to identify a number of related parts.In order for the device to operate at 44MHz frequency, there is a specific design.In order to mount it, it utiliSurface Mountes the Surface Mount method.The device can be classified as part of the Digital Signal Processors subcategory based on its specific characteristics.This device can be powered by voltages as low as 3.15V.The maximum voltage supplied to this device amounts to 3.45V.This device is powered by a voltage of 3.3V.External events are tracked and measured with 1 timers/counters.Processor core SHARC adopts the SHARC architecture.
ADSP-21061LASZ-176 Features
Supplied in the 240-BFQFP Exposed Pad package
Operating supply voltage of 3.3V
1 timers/counters
ADSP-21061LASZ-176 Applications
There are a lot of Analog Devices Inc. ADSP-21061LASZ-176 DSP applications.
- Image signal processing
- House construction
- Radar
- Real-time effects
- Digital camera
- Seismology
- Signal processing for telecommunications
- Image compression
- Medical imaging
- Speech processing and recognition
