ADSP-21062KSZ-160
| Parameters | |
|---|---|
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 240 |
| Type | Floating Point |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADSP-21062 |
| Pin Count | 240 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | Host Interface, Link Port, Serial Port |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 4.75V |
| RAM Size | 256kB |
| Memory Type | SRAM |
| Number of Bits | 32 |
| Supply Current-Max | 850mA |
| Bit Size | 32 |
| Data Bus Width | 32b |
| Number of Timers/Counters | 1 |
| Core Architecture | SHARC |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Integrated Cache | NO |
| RAM (words) | 2000000 |
| Voltage - I/O | 5.00V |
| Number of Serial I/Os | 2 |
| Number of External Interrupts | 3 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | External |
| Number of DMA Channels | 10 |
| Height | 3.4mm |
| Length | 32mm |
| Width | 32mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 240-BFQFP Exposed Pad |
| Number of Pins | 240 |
| Operating Temperature | 0°C~85°C TC |
| Packaging | Tray |
| Series | SHARC® |
| JESD-609 Code | e3 |
| Pbfree Code | no |
ADSP-21062KSZ-160 Overview
It is a type of electronic component available in package 240-BFQFP Exposed Pad.There is a packaging method of Tray provided with it.The Floating Point family provides a wide range of applications.The device is attached in a way that faces Surface Mount.If it is operating at the temperature of 0°C~85°C TC, then it will be operating normally.5.00V refers to the range of analog voltages that can be input or output.The SHARC? series incorporates this digital signal processor.The use of it is terminated by 240.The supply voltage is 5V.Pins are present on the 240 component.An overview of its configuration can be found in the section on 240 pins.It is possible to identify numerous related parts using the base part number ADSP-21062.40MHz is a frequency at which the device operates according to a specific design.Mounting is accomplished using Surface Mount.The device can be classified as part of the Digital Signal Processors subcategory based on its specific characteristics.4.75V is the minimum voltage that can be supplied to this device.There is a maximum voltage supply of 5.25V to this device.This device is powered by a voltage of 5V.Electricity is provided by 5V.Time and external events are measured and counted with 1 timers/counters.Using SHARC architecture, this processor core operates.It uses the SRAM memory type.An external source is causing 3 interrupts.There are 32 information stored in the device.It uses 10 DMA channels to transfer data without overloading the CPU.Using serial 2 I/Os, devices can communicate.
ADSP-21062KSZ-160 Features
Supplied in the 240-BFQFP Exposed Pad package
Operating supply voltage of 5V
1 timers/counters
3 external interrupts
ADSP-21062KSZ-160 Applications
There are a lot of Analog Devices Inc. ADSP-21062KSZ-160 DSP applications.
- Speech processing
- Automatic analysis system of EEG or ECG
- Financial signals
- Geoscience signal processing
- Tomography technology
- Speech signal processing
- Vibration signal processing
- Digital camera
- Audio compression
- Infinite impulse response filters
