ADSP-21160MKBZ-80
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 days ago) |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 400-BBGA |
| Number of Pins | 400 |
| Operating Temperature | 0°C~85°C TC |
| Packaging | Tray |
| Series | SHARC® |
| JESD-609 Code | e1 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 400 |
| Type | Floating Point |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Frequency | 80MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADSP-21160 |
| Pin Count | 400 |
| Operating Supply Voltage | 2.63V |
| Power Supplies | 2.53.3V |
| Interface | Host Interface, Link Port, Serial Port |
| Max Supply Voltage | 3.47V |
| Min Supply Voltage | 2.37V |
| Memory Size | 4MB |
| RAM Size | 512kB |
| Memory Type | EPROM |
| Number of Bits | 32 |
| Bit Size | 32 |
| Data Bus Width | 32b |
| Number of Timers/Counters | 1 |
| Core Architecture | SHARC |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Voltage - I/O | 3.30V |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | External |
| Voltage - Core | 2.50V |
| Height | 1.89mm |
| Length | 27.2mm |
| Width | 27.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADSP-21160MKBZ-80 Overview
It is a type of electronic component available in package 400-BBGA.The packaging way is Tray.Due to its Floating Point membership, it is ideal for a wide range of applications.In order to mount it, it must be in the direction of Surface Mount.By operating the device at the temperature of 0°C~85°C TC, a normal operation is ensured.It refers to the analog voltage range of 3.30V that may be input or output.The SHARC? series includes this digital signal processor.For its use, it has 400 terminations.2.5V is the supply voltage.Pins are available on the 400 component.In its configuration, it contains 400 pins.Many related parts can be identified by using the ADSP-21160 part number as a base.In order for the device to operate at the frequency of 80MHz, it has been designed specifically.Using Surface Mount as a mounting method, it is mounted.On the basis of its specific characteristics, this device can be classified as a Digital Signal Processors device.The minimum voltage supplied to this device is as low as 2.37V.Devices like this can be powered by voltages up to 3.47V.Using 2.63V as the supply voltage, it operates.Its memory can store 4MB data.2.53.3V electric power powers it.Timers and counters that measure time and count external events are also called 1 timers and counters.The processor core uses the architecture of the SHARC processor.It adopts EPROM as its memory type.There are 32 information stored in the device.
ADSP-21160MKBZ-80 Features
Supplied in the 400-BBGA package
Operating supply voltage of 2.63V
1 timers/counters
ADSP-21160MKBZ-80 Applications
There are a lot of Analog Devices Inc. ADSP-21160MKBZ-80 DSP applications.
- Streaming videos
- Telephone conversations
- Computer vision technology
- TVs
- Other sensor array processing
- Instrument modeling
- Sonar
- MP3 audio player
- Infinite impulse response filters
- Monitoring equipment
