ADSP-21261SKBCZ150
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 136-LFBGA, CSPBGA |
| Number of Pins | 136 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | SHARC® |
| JESD-609 Code | e1 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 136 |
| Type | Floating Point |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.8mm |
| Frequency | 150MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADSP-21261 |
| Pin Count | 136 |
| Operating Supply Voltage | 1.26V |
| Interface | DAI, SPI |
| Max Supply Voltage | 3.47V |
| Min Supply Voltage | 1.14V |
| Memory Size | 384kB |
| Number of I/O | 16 |
| RAM Size | 128kB |
| Memory Type | ROM |
| Bit Size | 32 |
| Data Bus Width | 32b |
| Number of Timers/Counters | 3 |
| Core Architecture | SHARC |
| Boundary Scan | YES |
| Low Power Mode | NO |
| Voltage - I/O | 3.30V |
| Number of UART Channels | 4 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | ROM (384kB) |
| Voltage - Core | 1.20V |
| Number of SPI Channels | 1 |
| Height | 1.31mm |
| Length | 12.1mm |
| Width | 12.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADSP-21261SKBCZ150 Overview
It is a type of electronic component available in package 136-LFBGA, CSPBGA.There is a packaging method of Tray provided with it.As a member of Floating Point, it is ideally suitable for a wide range of applications.Surface Mount is mounted in a manner that allows it to be moved.Operating at the temperature of 0°C~70°C TA ensures its normal operation.The analog voltage range of 3.30V refers to the input or output voltage.The SHARC? series contains this digital signal processor.The uses of this product can be terminated with 136.1.2V provides the supply voltage for it.In this component, there are pins for 136.In its configuration, 136 pins can be found.Several related parts can be identified using its base part number, ADSP-21261.This device is designed specifically to operate at frequency 150MHz.It adopts Surface Mount as its mounting way.The characteristics of this device allow it to be placed in the subcategory of Digital Signal Processors.In order to power this device, a voltage as low as 1.14V needs to be supplied.A maximum voltage of 3.47V can be provided to this device.This device is powered by a voltage of 1.26V.Its memory can be used to store 384kB data.The 4 UART channels support asynchronous serial communication in which data formats and transmission speeds are configurable.3 timers/counters are used to measure time and count external events.It is based on the SHARC architecture.A 16 I/O interface is present on the device.It uses the ROM memory type.1 SPI channels are used for short-range communication in this embedded system.
ADSP-21261SKBCZ150 Features
Supplied in the 136-LFBGA, CSPBGA package
Operating supply voltage of 1.26V
3 timers/counters
16 I/Os
ADSP-21261SKBCZ150 Applications
There are a lot of Analog Devices Inc. ADSP-21261SKBCZ150 DSP applications.
- Automobile electronic gadgets
- Infinite impulse response filters
- Processing system
- Consumer electronic gadgets
- Radio detection and rangin systems
- 3D tomography and imaging processing
- Receivers
- Image compression
- Vibration signal processing
- Digital image processing
