ADSP-21261SKSTZ150
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 144-LQFP |
| Number of Pins | 144 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | SHARC® |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 144 |
| Termination | SMD/SMT |
| Type | Floating Point |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.5mm |
| Frequency | 150MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADSP-21261 |
| Pin Count | 144 |
| Interface | DAI, SPI |
| Max Supply Voltage | 1.26V |
| Min Supply Voltage | 1.14V |
| Memory Size | 384kB |
| Number of I/O | 16 |
| RAM Size | 128kB |
| Memory Type | ROM |
| Bit Size | 32 |
| Data Bus Width | 32b |
| Number of Timers/Counters | 3 |
| Core Architecture | SHARC |
| Boundary Scan | YES |
| Low Power Mode | NO |
| Voltage - I/O | 3.30V |
| Number of UART Channels | 4 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | ROM (384kB) |
| Voltage - Core | 1.20V |
| Number of SPI Channels | 1 |
| Height | 1.45mm |
| Length | 20.2mm |
| Width | 20.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADSP-21261SKSTZ150 Overview
It is a kind of electronic component that comes in a package of 144-LQFP.Packaging is provided in the form of Tray.With its association with Floating Point, it is suitable for a wide range of applications.There is a mounting point for it along the direction of Surface Mount.At the temperature of 0°C~70°C TA, the device is guaranteed to operate normally.The analog voltage range of 3.30V refers to the voltage that can be input or ouput.Digital signal processors such as this one are included in the SHARC? series.Its uses have 144 terminations.The voltage supplied by 1.2V is used to operate it.144 component pins are present.The configuration of the device includes 144 pins.It is possible to identify numerous related parts using the base part number ADSP-21261.In order for the device to operate at the frequency of 150MHz, it has been designed specifically.It adopts Surface Mount as its mounting way.This device can be classified into the subcategory Digital Signal Processors based on its specific characteristics.This device requires a minimum voltage of 1.14V.The maximum voltage for this device is 1.26V.Using this device, you can store 384kB data.Data format and transmission speed are configurable on 4 UART channels for asynchronous serial communication.Timer/counters for measuring and counting external events are called 3 timers or counters.The processor core uses the architecture of the SHARC processor.There are 16 inputs and outputs on the device.Memory type ROM is used by it.The embedded system uses short-range 1 SPI channels for communication.
ADSP-21261SKSTZ150 Features
Supplied in the 144-LQFP package
3 timers/counters
16 I/Os
ADSP-21261SKSTZ150 Applications
There are a lot of Analog Devices Inc. ADSP-21261SKSTZ150 DSP applications.
- Automobiles
- Receivers
- Streaming videos
- Tomography technology
- Remote sensing image processing technology
- Spectral density estimation
- Signal processing for telecommunications
- House construction
- Radio detection and rangin systems
- Biomedical treatment
