ADSP-21262SKBC-200
| Parameters | |
|---|---|
| Contact Plating | Lead, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 136-LFBGA, CSPBGA |
| Number of Pins | 136 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | SHARC® |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 136 |
| Type | Floating Point |
| Terminal Finish | Tin/Lead/Silver (Sn/Pb/Ag) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.8mm |
| Reach Compliance Code | not_compliant |
| Frequency | 200MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADSP-21262 |
| Pin Count | 136 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.26V |
| Interface | DAI, SPI |
| Max Supply Voltage | 3.47V |
| Min Supply Voltage | 1.14V |
| Memory Size | 512kB |
| Number of I/O | 16 |
| RAM Size | 256kB |
| Bit Size | 32 |
| Data Bus Width | 32b |
| Number of Timers/Counters | 3 |
| Address Bus Width | 16 |
| Core Architecture | SHARC |
| On Chip Program ROM Width | 32 |
| Boundary Scan | YES |
| Low Power Mode | NO |
| Integrated Cache | NO |
| Voltage - I/O | 3.30V |
| ROM Programmability | MROM |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| On Chip Data RAM Width | 32 |
| Non-Volatile Memory | ROM (512kB) |
| Voltage - Core | 1.20V |
| Number of DMA Channels | 22 |
| Height Seated (Max) | 1.7mm |
| Length | 12mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
ADSP-21262SKBC-200 Overview
It is a type of electronic component available in package 136-LFBGA, CSPBGA.Tray packaging is provided for it.Its Floating Point status makes it ideal for a wide range of applications.The machine is mounted in the way of Surface Mount in order to facilitate its operation.If it is operating at the temperature of 0°C~70°C TA, then it will be operating normally.This refers to the analog voltage range that can be input or output from 3.30V.Digital signal processors such as this one are included in the SHARC? series.In terms of its uses, it has 136 terminations.It operates with the supply voltage of 1.2V.In this component, there are pins for 136.An overview of its configuration can be found in the section on 136 pins.With its base part number ADSP-21262, it is possible to identify a number of related parts.It is specifically designed to operate with the frequency of 200MHz.Mounting is accomplished using Surface Mount.The specific characteristics of this device can be categoriDigital Signal Processorsed within the Digital Signal Processors subcategory.This device operates at a voltage as low as 1.14V.It can be supplied with a maximum voltage of 3.47V.It operates with the supply voltage of 1.26V.Its memory can be used to store 512kB data.Time and external events are measured and counted with 3 timers/counters.This processor core adopts the architecture of SHARC.The device has 16 I/Os.Data is transferred using 22 DMA channels without overloading the CPU.
ADSP-21262SKBC-200 Features
Supplied in the 136-LFBGA, CSPBGA package
Operating supply voltage of 1.26V
3 timers/counters
16 I/Os
ADSP-21262SKBC-200 Applications
There are a lot of Analog Devices Inc. ADSP-21262SKBC-200 DSP applications.
- Remote sensing image processing technology
- Other sensor array processing
- Instrument modeling
- Geophysical processing
- Digital image processing
- Image signal processing
- Radio detection and rangin systems
- Computers and laptop
- Airplanes
- Infrared
