ADSP-21362BSWZ-1AA
| Parameters | |
|---|---|
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.5mm |
| Frequency | 333MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADSP-21362 |
| Pin Count | 144 |
| Operating Supply Voltage | 1.26V |
| Interface | DAI, SPI |
| Max Supply Voltage | 3.47V |
| Min Supply Voltage | 1.14V |
| Memory Size | 512kB |
| Number of I/O | 16 |
| RAM Size | 384kB |
| Bit Size | 32 |
| Data Bus Width | 32b |
| Number of Timers/Counters | 3 |
| Address Bus Width | 16 |
| Core Architecture | SHARC |
| Boundary Scan | YES |
| Low Power Mode | NO |
| Voltage - I/O | 3.30V |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | ROM (512kB) |
| Voltage - Core | 1.20V |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 144-LQFP Exposed Pad |
| Number of Pins | 144 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | SHARC® |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 144 |
| Type | Floating Point |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
ADSP-21362BSWZ-1AA Overview
It is a kind of electronic component available in the 144-LQFP Exposed Pad package.Tray is the packaging method provided.Due to its Floating Point membership, it is ideal for a wide range of applications.In order to mount it, it must be in the direction of Surface Mount.By operating the device at the temperature of -40°C~85°C TA, a normal operation is ensured.The digital voltage range of 3.30V refers to the voltage that can be input or output.The SHARC? series includes this digital signal processor.The terminations for its uses are 144.Using 1.2V as the supply voltage, it operates.144 components have pins.The configuration of the device includes 144 pins.The base part number ADSP-21362 allows identification of a wide range of related parts.In order for the device to operate at 333MHz frequency, there is a specific design.Surface Mount is used as the mounting method.On the basis of its specific characteristics, this device can be classified as a Digital Signal Processors device.1.14V is the minimum voltage that can be supplied to this device.This device can be powered by 3.47V voltages.A supply voltage of 1.26V is required for its operation.This device is able to store 512kB data in its memory.Time and external events are measured and counted with 3 timers/counters.An architecture of SHARC is adopted by this processor core.A 16 I/O interface is present on the device.
ADSP-21362BSWZ-1AA Features
Supplied in the 144-LQFP Exposed Pad package
Operating supply voltage of 1.26V
3 timers/counters
16 I/Os
ADSP-21362BSWZ-1AA Applications
There are a lot of Analog Devices Inc. ADSP-21362BSWZ-1AA DSP applications.
- Encoding/broadcast
- Infrared
- Radar
- Automatic analysis system of EEG or ECG
- Digital communications
- Finite impulse response digital filters
- Consumer electronic gadgets
- Streaming music
- Fourier transform
- Scene analysis technology
