ADSP-21363BBCZ-1AA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 136-LFBGA, CSPBGA |
| Number of Pins | 136 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | SHARC® |
| JESD-609 Code | e1 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 136 |
| Type | Floating Point |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.8mm |
| Frequency | 333MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADSP-21363 |
| Pin Count | 136 |
| Operating Supply Voltage | 1.26V |
| Interface | DAI, SPI |
| Max Supply Voltage | 3.47V |
| Min Supply Voltage | 1.14V |
| Memory Size | 512kB |
| Number of I/O | 16 |
| RAM Size | 384kB |
| Memory Type | ROM |
| Number of Bits | 32 |
| Bit Size | 32 |
| Data Bus Width | 32b |
| Number of Timers/Counters | 3 |
| Core Architecture | SHARC |
| Boundary Scan | YES |
| Low Power Mode | NO |
| Voltage - I/O | 3.30V |
| Number of UART Channels | 6 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | ROM (512kB) |
| Voltage - Core | 1.20V |
| Number of SPI Channels | 2 |
| Height | 1.31mm |
| Length | 12.1mm |
| Width | 12.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADSP-21363BBCZ-1AA Overview
The 136-LFBGA, CSPBGA package contains these electronic components.Tray is the packaging method provided.Floating Point members are well suited for a wide range of applications.There is a mounting point for it along the direction of Surface Mount.It is recommended that the device operate at a temperature of -40°C~85°C TA to ensure its normal operation.Voltages can be input or output within 3.30V's analog voltage range.There are several digital signal processors in the SHARC? series, including this one.In order to use it, it has 136 terminations.A voltage of 1.2V is used as the supply voltage.In this component, there are pins for 136.The configuration of this board includes 136 pins.By using its base part number of ADSP-21363, many related parts can be identified.A specific design is present for the device in order for it to operate at the frequency of 333MHz.As a mounting method, it uses Surface Mount.On the basis of its specific characteristics, this device can be classified as a Digital Signal Processors device.This device requires a minimum voltage of 1.14V.It can be supplied with a maximum voltage of 3.47V.In order for it to operate, 1.26V is the supply voltage.Its memory can store 512kB data.6 UART channels are configured for asynchronous serial communication in which the data format and transmission speeds are configurable.Time and external events are measured and counted with 3 timers/counters.It is based on the SHARC architecture.There are 16 I/Os on the device.The memory type adopted by it is ROM.Data is stored in the device in 32 formats.Embedded systems in this system use 2 SPI channels for short-distance communication.
ADSP-21363BBCZ-1AA Features
Supplied in the 136-LFBGA, CSPBGA package
Operating supply voltage of 1.26V
3 timers/counters
16 I/Os
ADSP-21363BBCZ-1AA Applications
There are a lot of Analog Devices Inc. ADSP-21363BBCZ-1AA DSP applications.
- Voice recognition
- Smart camera
- Consumer electronic gadgets
- Monitoring equipment
- Streaming videos
- Computers and laptop
- Fourier transform
- MP3 audio player
- Biometrics
- Speech signal processing
