ADSP-21363BSWZ-1AA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 144-LQFP Exposed Pad |
| Number of Pins | 144 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | SHARC® |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 144 |
| Type | Floating Point |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.5mm |
| Frequency | 333MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADSP-21363 |
| Pin Count | 144 |
| Operating Supply Voltage | 1.26V |
| Interface | DAI, SPI |
| Max Supply Voltage | 3.47V |
| Min Supply Voltage | 1.14V |
| Memory Size | 512kB |
| Number of I/O | 16 |
| RAM Size | 384kB |
| Bit Size | 32 |
| Data Bus Width | 32b |
| Number of Timers/Counters | 3 |
| Address Bus Width | 16 |
| Core Architecture | SHARC |
| Boundary Scan | YES |
| Low Power Mode | NO |
| Voltage - I/O | 3.30V |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | ROM (512kB) |
| Voltage - Core | 1.20V |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADSP-21363BSWZ-1AA Overview
It is a type of electronic component available in package 144-LQFP Exposed Pad.A packaging way of Tray is provided.Floating Point's wide range of applications makes it ideal for a wide variety of applications.In order to mount it, it must be in the direction of Surface Mount.At the temperature of -40°C~85°C TA, the device is guaranteed to operate normally.Voltages can be input or output within 3.30V's analog voltage range.SHARC? series digital signal processors contain this digital signal processor.In order to use it, it has 144 terminations.The voltage supplied by 1.2V is used to operate it.The 144 component has pins.The configuration of this board includes 144 pins.With its base part number ADSP-21363, it is possible to identify a number of related parts.In order for the device to operate at the frequency of 333MHz, it has been designed specifically.Mounting is accomplished using Surface Mount.Based on its specific characteristics, this device can be classified into the subcategory of Digital Signal Processors.This device operates at a voltage as low as 1.14V.Devices like this can be powered by voltages up to 3.47V.1.26V is the supply voltage for this device.Its memory can store 512kB data.Time and external events are measured and counted with 3 timers/counters.This processor core adopts the architecture of SHARC.A 16 I/O interface is present on the device.
ADSP-21363BSWZ-1AA Features
Supplied in the 144-LQFP Exposed Pad package
Operating supply voltage of 1.26V
3 timers/counters
16 I/Os
ADSP-21363BSWZ-1AA Applications
There are a lot of Analog Devices Inc. ADSP-21363BSWZ-1AA DSP applications.
- Medical imaging
- Radar
- Infrared
- Radio detection and rangin systems
- Statistical signal processing
- MP3 audio player
- Airplanes
- Audio synthesis
- Digital communications
- Digital hardware
