ADSP-21363KSWZ-1AA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 144-LQFP Exposed Pad |
| Number of Pins | 144 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | SHARC® |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 144 |
| Termination | SMD/SMT |
| Type | Floating Point |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.5mm |
| Frequency | 333MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADSP-21363 |
| Pin Count | 144 |
| Interface | DAI, SPI |
| Max Supply Voltage | 1.26V |
| Min Supply Voltage | 1.14V |
| Memory Size | 512kB |
| Number of I/O | 16 |
| RAM Size | 384kB |
| Memory Type | ROM |
| Bit Size | 32 |
| Data Bus Width | 32b |
| Number of Timers/Counters | 3 |
| Core Architecture | SHARC |
| Boundary Scan | YES |
| Low Power Mode | NO |
| Voltage - I/O | 3.30V |
| Number of UART Channels | 6 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | ROM (512kB) |
| Voltage - Core | 1.20V |
| Number of SPI Channels | 2 |
| Height | 1.45mm |
| Length | 20.2mm |
| Width | 20.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADSP-21363KSWZ-1AA Overview
Basically, it is a type of electronic component that is available in a 144-LQFP Exposed Pad package.Tray packaging is provided for it.The Floating Point family provides a wide range of applications.In order to mount it, it must be in the direction of Surface Mount.At the temperature of 0°C~70°C TA, the device is guaranteed to operate normally.3.30V refers to the range of analog voltages that can be input or output.The SHARC? series includes this digital signal processor.The terminations for its uses are 144.The voltage supplied by 1.2V is used to operate it.The 144 component has pins.There are 144 pins in its configuration.It is possible to identify numerous related parts using the base part number ADSP-21363.In order for the device to operate at 333MHz frequency, there is a specific design.Surface Mount is used as the mounting method.Based on its specific characteristics, this device can be classified into the subcategory of Digital Signal Processors.1.14V is the minimum voltage that can be supplied to this device.It is capable of receiving a maximum voltage of 1.26V.There is a memory on this device that can store 512kB data.It is possible to configure the data format and transfer speed of 6 UART channels for synchronous serial communication.Timer/counters for measuring and counting external events are called 3 timers or counters.An architecture of SHARC is adopted by this processor core.There are 16 inputs and outputs on the device.Memory type ROM is used by it.Embedded systems in this system use 2 SPI channels for short-distance communication.
ADSP-21363KSWZ-1AA Features
Supplied in the 144-LQFP Exposed Pad package
3 timers/counters
16 I/Os
ADSP-21363KSWZ-1AA Applications
There are a lot of Analog Devices Inc. ADSP-21363KSWZ-1AA DSP applications.
- Infinite impulse response filters
- Real-time effects
- Sound navigation and ranging systems
- Digital camera
- 3D tomography and imaging processing
- Instrument modeling
- Control systems
- TVs
- Tomography technology
- Processing system
