ADSP-21368BBPZ-2A
| Parameters | |
|---|---|
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Frequency | 400GHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADSP-21368 |
| Pin Count | 256 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.35V |
| Interface | DAI, DPI |
| Max Supply Voltage | 3.47V |
| Min Supply Voltage | 1.14V |
| Memory Size | 768kB |
| Number of I/O | 16 |
| RAM Size | 256kB |
| Bit Size | 32 |
| Data Bus Width | 32b |
| Number of Timers/Counters | 3 |
| Address Bus Width | 24 |
| Core Architecture | SHARC |
| Boundary Scan | YES |
| Low Power Mode | NO |
| Voltage - I/O | 3.30V |
| Number of UART Channels | 2 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | ROM (768kB) |
| Voltage - Core | 1.20V |
| Clock Rate | 333MHz |
| Height Seated (Max) | 1.7mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 256-LBGA Exposed Pad |
| Number of Pins | 256 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | SHARC® |
| JESD-609 Code | e1 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 256 |
| Type | Floating Point |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
ADSP-21368BBPZ-2A Overview
It is a type of electronic component available in package 256-LBGA Exposed Pad.There is a packaging method of Tray provided with it.Due to its membership in Floating Point, it is ideally suited for a wide range of uses.The device is attached in a way that faces Surface Mount.Keeping the device at the temperature of -40°C~85°C TA will ensure that it runs as it should.The digital voltage range of 3.30V refers to the voltage that can be input or output.This digital signal processor is part of the SHARC? series.In terms of its uses, it has 256 terminations.1.2V provides the supply voltage for it.The 256 component has pins.256 pins can be found in its configuration.Based on its base part number of ADSP-21368, many ralated parts can be found.To operate at 400GHz frequency, the device has a specific design.In order to mount it, it utiliSurface Mountes the Surface Mount method.The device can be classified under the subcategory Digital Signal Processors based on its specific characteristics.In this device, the minimum voltage is 1.14V.It is capable of receiving a maximum voltage of 3.47V.This device is powered by a voltage of 1.35V.Data can be stored in this device's memory in 768kB format.Data format and transmission speed are configurable on 2 UART channels for asynchronous serial communication.Count, measure, and measure external events using 3 timers/counters.The processor core uses the architecture of the SHARC processor.There are 16 I/Os on the device.
ADSP-21368BBPZ-2A Features
Supplied in the 256-LBGA Exposed Pad package
Operating supply voltage of 1.35V
3 timers/counters
16 I/Os
ADSP-21368BBPZ-2A Applications
There are a lot of Analog Devices Inc. ADSP-21368BBPZ-2A DSP applications.
- Audio synthesis
- Geoscience signal processing
- Speech processing
- Radio detection and rangin systems
- Processing system
- Computers and laptop
- Instrument modeling
- Image signal processing
- Consumer electronic gadgets
- Seismology
