ADSP-21375KSWZ-2B
| Parameters | |
|---|---|
| Max Supply Voltage | 3.47V |
| Min Supply Voltage | 1.14V |
| Memory Size | 256kB |
| Number of I/O | 16 |
| RAM Size | 64kB |
| Memory Type | ROM |
| Bit Size | 32 |
| Data Bus Width | 32b |
| Core Architecture | SHARC |
| Boundary Scan | YES |
| Low Power Mode | NO |
| Voltage - I/O | 3.30V |
| Number of UART Channels | 1 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | ROM (256kB) |
| Voltage - Core | 1.20V |
| Number of SPI Channels | 2 |
| Height | 1.45mm |
| Length | 28.1mm |
| Width | 28.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 208-LQFP Exposed Pad |
| Number of Pins | 208 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | SHARC® |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 208 |
| Termination | SMD/SMT |
| Type | Floating Point |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.5mm |
| Frequency | 266MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADSP-21375 |
| Pin Count | 208 |
| Operating Supply Voltage | 1.26V |
| Interface | DAI, DPI |
ADSP-21375KSWZ-2B Overview
In the 208-LQFP Exposed Pad package, it is a type of electronic component.Tray packaging is provided for it.Due to its membership in Floating Point, it is ideally suited for a wide range of uses.In order to mount it, it must be in the direction of Surface Mount.If it is operating at the temperature of 0°C~70°C TA, then it will be operating normally.The digital voltage range of 3.30V refers to the voltage that can be input or output.The SHARC? series includes this digital signal processor.The use of it is terminated by 208.The voltage supplied by 1.2V is used to operate it.Pins are located on the 208 component.The configuration of the device includes 208 pins.There are a number of related parts that can be identified using the base part number ADSP-21375.In order for the device to operate at 266MHz frequency, there is a specific design.As a mounting method, it uses Surface Mount.Based on its specific characteristics, this device can be classified into the subcategory of Digital Signal Processors.Devices like this can be powered with as little as 1.14V volts.3.47V is the maximum voltage that can be supplied to this device.The device operates with a supply voltage of 1.26V.There is a memory on this device that can store 256kB data.It is possible to configure the data format and transfer speed of 1 UART channels for synchronous serial communication.SHARC-architecture is used in this processor core.16 I/Os are included with the device.Memory type ROM is used by it.The embedded system uses short-range 2 SPI channels for communication.
ADSP-21375KSWZ-2B Features
Supplied in the 208-LQFP Exposed Pad package
Operating supply voltage of 1.26V
16 I/Os
ADSP-21375KSWZ-2B Applications
There are a lot of Analog Devices Inc. ADSP-21375KSWZ-2B DSP applications.
- Real-time effects
- Seismology
- TVs
- Sound navigation and ranging systems
- Boats
- House construction
- Fourier transform
- Statistical signal processing
- Digital image processing
- Receivers
