ADSP-21469KBCZ-3
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 324-BGA, CSPBGA |
| Number of Pins | 324 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | SHARC® |
| JESD-609 Code | e1 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 324 |
| Type | Floating Point |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.05V |
| Frequency | 450MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADSP-21469 |
| Pin Count | 324 |
| Interface | DAI, DPI, EBI/EMI, I2C, SCI, SPI, SSP, UART/USART |
| Max Supply Voltage | 1.1V |
| Min Supply Voltage | 1V |
| Memory Size | 5MB |
| Number of I/O | 16 |
| RAM Size | 640kB |
| Memory Type | ROMless |
| Bit Size | 32 |
| Data Bus Width | 32b |
| Core Architecture | SHARC |
| Boundary Scan | YES |
| Low Power Mode | NO |
| Voltage - I/O | 3.30V |
| Number of I2C Channels | 1 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | External |
| Voltage - Core | 1.05V |
| On Chip Data RAM | 5Mbit |
| Number of SPI Channels | 2 |
| Clock Rate | 400MHz |
| Height | 1.31mm |
| Length | 19.1mm |
| Width | 19.1mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADSP-21469KBCZ-3 Overview
This is an electronic component with a 324-BGA, CSPBGA package.It is provided with a packaging way of Tray.The fact that it belongs to the Floating Point family means that it can be applied to a wide range of applications.It is mounted in the way of Surface Mount.It is recommended that the device operate at a temperature of -40°C~85°C TA to ensure its normal operation.In analog circuits, the analog voltage range 3.30V represents the voltage range that is available for input or output.As part of the SHARC? series, this digital signal processor is included.The terminations for its uses are 324.This device is powered by 1.05V's supply voltage.324 component pins are present.An overview of its configuration can be found in the section on 324 pins.By using its base part number of ADSP-21469, many related parts can be identified.In order for the device to operate at the frequency of 450MHz, it has been designed specifically.As a mounting method, it uses Surface Mount.The characteristics of this device allow it to be placed in the subcategory of Digital Signal Processors.This device operates at a voltage as low as 1V.It can be supplied with a maximum voltage of 1.1V.This device is able to store 5MB data in its memory.A SHARC-architecture processor core is used here.The device is equipped with 16 I/Os.The memory type adopted by it is ROMless.Embedded systems in this system use 2 SPI channels for short-distance communication.In order to establish communication between more ICs, 1 I2C channels are used.
ADSP-21469KBCZ-3 Features
Supplied in the 324-BGA, CSPBGA package
16 I/Os
ADSP-21469KBCZ-3 Applications
There are a lot of Analog Devices Inc. ADSP-21469KBCZ-3 DSP applications.
- Spectral density estimation
- Signal processing for telecommunications
- Other sensor array processing
- Statistical signal processing
- Biometrics
- Audio
- Machinery and equipment
- Financial signals
- Image signal processing
- Instrument modeling
