ADSP-21478BSWZ-2A
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | CONTACT ADI (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | SHARC® |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Type | Floating Point |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.5mm |
| Frequency | 266MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ADSP-21478 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.2V |
| Interface | DAI, DPI, EBI/EMI, I2C, SPI, SPORT, UART/USART |
| Max Supply Voltage | 1.26V |
| Min Supply Voltage | 1.14V |
| Memory Size | 512kB |
| RAM Size | 384kB |
| Memory Type | ROM |
| Bit Size | 40 |
| Data Bus Width | 32b |
| Core Architecture | SHARC |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Integrated Cache | YES |
| Voltage - I/O | 3.30V |
| Number of ADC Channels | 1 |
| Number of GPIO | 16 |
| Non-Volatile Memory | ROM (4Mbit) |
| Voltage - Core | 1.20V |
| On Chip Data RAM | 3Mbit |
| Number of SPI Channels | 2 |
| Height | 1.45mm |
| Length | 14.2mm |
| Width | 14.2mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADSP-21478BSWZ-2A Overview
It is a kind of electronic component available in the 100-LQFP Exposed Pad package.It has a packaging style of Tray.Floating Point members are well suited for a wide range of applications.It is mounted in the way of Surface Mount.The operation of the device at the temperature of -40°C~85°C TA ensures the normal operation of the device.The digital voltage range of 3.30V refers to the voltage that can be input or output.The SHARC? series contains this digital signal processor.Its uses have 100 terminations.This device is powered by 1.2V's supply voltage.100 component pins are present.This configuration contains 100 pins.It is possible to identify numerous related parts using the base part number ADSP-21478.Specifically, the device is designed to operate at a frequency of 266MHz.As a result of its specific characteristics, this device can be classified under the Digital Signal Processors subcategory.1.14V is the minimum voltage that can be supplied to this device.There is a maximum voltage supply of 1.26V to this device.Using 1.2V as the supply voltage, it operates.Its memory is capable of storing 512kB data.The architecture of this processor core is SHARC.ROM is its memory type.For short-distance communication, 2 SPI channels are used.For easier access to the device's internal properties, there are 16 GPIOs.There are 1 channels in an ADC, which means there can be simultaneous readings of analog values.
ADSP-21478BSWZ-2A Features
Supplied in the 100-LQFP Exposed Pad package
Operating supply voltage of 1.2V
ADSP-21478BSWZ-2A Applications
There are a lot of Analog Devices Inc. ADSP-21478BSWZ-2A DSP applications.
- Vehicle electronics
- Electronic information engineering
- Computer vision technology
- Financial signals
- House construction
- Seismology
- Speech processing
- Monitoring equipment
- Automobiles
- Compression of videos
