ADSP-21478KBCZ-1A
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | CONTACT ADI (Last Updated: 1 month ago) |
| Contact Plating | Copper, Silver, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 196-LFBGA, CSPBGA |
| Surface Mount | YES |
| Number of Pins | 196 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | SHARC® |
| JESD-609 Code | e1 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 196 |
| Type | Floating Point |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.8mm |
| Frequency | 300MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADSP-21478 |
| Pin Count | 196 |
| Operating Supply Voltage | 1.2V |
| Interface | DAI, DPI, EBI/EMI, I2C, SPI, SPORT, UART/USART |
| Max Supply Voltage | 1.26V |
| Min Supply Voltage | 1.14V |
| Memory Size | 512kB |
| RAM Size | 384kB |
| Memory Type | ROM |
| Data Bus Width | 32b |
| Core Architecture | SHARC |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Voltage - I/O | 3.30V |
| Number of ADC Channels | 1 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Number of GPIO | 16 |
| Non-Volatile Memory | ROM (4Mbit) |
| Voltage - Core | 1.20V |
| On Chip Data RAM | 3Mbit |
| Number of SPI Channels | 2 |
| Clock Rate | 200MHz |
| Height | 1.13mm |
| Length | 12.1mm |
| Width | 12.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADSP-21478KBCZ-1A Overview
The 196-LFBGA, CSPBGA package contains these electronic components.Packaging is provided in the form of Tray.In addition to meeting a wide range of requirements, it is a member of Floating Point.The machine is mounted in the way of Surface Mount in order to facilitate its operation.Keeping the device at the temperature of 0°C~70°C TA will ensure that it runs as it should.3.30V refers to the range of analog voltages that can be input or output.There are several digital signal processors in the SHARC? series, including this one.The use of it is terminated by 196.196 component pins are present.This configuration contains 196 pins.It is possible to identify numerous related parts using the base part number ADSP-21478.A specific design is present for the device in order for it to operate at the frequency of 300MHz.This device requires a minimum voltage of 1.14V.It can be supplied with a maximum voltage of 1.26V.The device operates on a voltage of 1.2V as its supply voltage.This device is able to store 512kB data in its memory.Using SHARC architecture, this processor core operates.As far as memory type is concerned, it uses ROM.In this embedded system, 2 SPI channels are used for short-distance communication.An easy way to access the device's internal properties is provided by 16 GPIO.An ADC has 1 channels, which are the number of analog values it can read simultaneously.
ADSP-21478KBCZ-1A Features
Supplied in the 196-LFBGA, CSPBGA package
Operating supply voltage of 1.2V
ADSP-21478KBCZ-1A Applications
There are a lot of Analog Devices Inc. ADSP-21478KBCZ-1A DSP applications.
- Consumer electronic gadgets
- Infinite impulse response filters
- Financial signals
- Statistical signal processing
- Medical imaging
- Geophysical processing
- Digital hardware
- Voice recognition
- Machinery and equipment
- Electronic information engineering
