ADSP-21478KCPZ-1A
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | CONTACT ADI (Last Updated: 3 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 88-VFQFN Exposed Pad, CSP |
| Number of Pins | 88 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | SHARC® |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 88 |
| Type | Floating Point |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.5mm |
| Frequency | 266MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADSP-21478 |
| Pin Count | 88 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.2V |
| Interface | DAI, DPI, EBI/EMI, I2C, SPI, SPORT, UART/USART |
| Max Supply Voltage | 1.26V |
| Min Supply Voltage | 1.14V |
| Memory Size | 3MB |
| Number of I/O | 16 |
| Speed | 200 MHz |
| RAM Size | 384kB |
| Bit Size | 40 |
| Data Bus Width | 32b |
| Number of Timers/Counters | 3 |
| Address Bus Width | 24 |
| Core Architecture | SHARC |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Integrated Cache | YES |
| Voltage - I/O | 3.30V |
| Number of UART Channels | 1 |
| Non-Volatile Memory | ROM (4Mbit) |
| Voltage - Core | 1.20V |
| On Chip Data RAM | 3Mbit |
| Clock Rate | 200MHz |
| Height Seated (Max) | 0.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
ADSP-21478KCPZ-1A Overview
It is a type of electronic component available in package 88-VFQFN Exposed Pad, CSP.There is a packaging method of Tray provided with it.With its association with Floating Point, it is suitable for a wide range of applications.Surface Mount is the direction in which it is mounted.As long as it is operated at the temperature of 0°C~70°C TA, it will operate normally.It refers to the analog voltage range of 3.30V that may be input or output.The SHARC? series incorporates this digital signal processor.The terminations for its uses are 88.The supply voltage is 1.2V.Pins are available for 88 components.In its configuration, 88 pins can be found.By using its base part number of ADSP-21478, many related parts can be identified.This device is designed specifically to operate at frequency 266MHz.In order to mount it, it utiliSurface Mountes the Surface Mount method.The characteristics of this device allow it to be placed in the subcategory of Digital Signal Processors.This device operates at a voltage as low as 1.14V.There is a maximum voltage supply of 1.26V to this device.1.2V is the supply voltage for this device.3MB data can be stored in the memory of this device.Data formats and transmission speeds are configurable for 1 UART channels used for asynchronous serial communication.3 timers/counters are used to measure time and count external events.An architecture of SHARC is adopted by this processor core.The device has 16 I/Os.
ADSP-21478KCPZ-1A Features
Supplied in the 88-VFQFN Exposed Pad, CSP package
Operating supply voltage of 1.2V
3 timers/counters
16 I/Os
ADSP-21478KCPZ-1A Applications
There are a lot of Analog Devices Inc. ADSP-21478KCPZ-1A DSP applications.
- Smart phones
- Fourier transform
- Video coding, audio coding
- Automatic analysis system of EEG or ECG
- Processing system
- Geophysical processing
- Other sensor array processing
- Voice recognition
- Biomedical treatment
- Smart camera
