ADSP-21478KSWZ-1A
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | CONTACT ADI (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 100 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | SHARC® |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Type | Floating Point |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.5mm |
| Frequency | 300MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ADSP-21478 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.2V |
| Interface | DAI, DPI, EBI/EMI, I2C, SPI, SPORT, UART/USART |
| Max Supply Voltage | 1.26V |
| Min Supply Voltage | 1.14V |
| Memory Size | 512kB |
| RAM Size | 384kB |
| Memory Type | ROM |
| Bit Size | 40 |
| Data Bus Width | 32b |
| Core Architecture | SHARC |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Integrated Cache | YES |
| Voltage - I/O | 3.30V |
| Number of ADC Channels | 1 |
| Number of GPIO | 16 |
| Non-Volatile Memory | ROM (4Mbit) |
| Voltage - Core | 1.20V |
| On Chip Data RAM | 3Mbit |
| Number of SPI Channels | 2 |
| Clock Rate | 200MHz |
| Height | 1.45mm |
| Length | 14.2mm |
| Width | 14.2mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADSP-21478KSWZ-1A Overview
It is a type of electronic component available in package 100-LQFP Exposed Pad.It has a packaging style of Tray.As a member of Floating Point, it is ideally suitable for a wide range of applications.In order to mount it, it must be in the direction of Surface Mount.It is important that the device is operated at a temperature of 0°C~70°C TA in order to ensure its normal functioning.In analog circuits, the analog voltage range 3.30V represents the voltage range that is available for input or output.Digital signal processors such as this one are included in the SHARC? series.The uses of this product can be terminated with 100.A voltage of 1.2V is used as the supply voltage.100 component pins are present.In its configuration, 100 pins can be found.With its base part number ADSP-21478, it is possible to identify a number of related parts.It is specifically designed to operate with the frequency of 300MHz.The characteristics of this device allow it to be placed in the subcategory of Digital Signal Processors.1.14V is the minimum voltage that can be supplied to this device.1.26V is the maximum voltage that can be supplied to this device.The device operates with a supply voltage of 1.2V.Using this device, you can store 512kB data.An architecture of SHARC is adopted by this processor core.ROM is its memory type.A short-distance communication channel is used in this embedded system. The channels are 2 SPI.To facilitate access to the devices internal properties, 16 GPIOs act as interfaces.There are 1 channels in an ADC, which means there can be simultaneous readings of analog values.
ADSP-21478KSWZ-1A Features
Supplied in the 100-LQFP Exposed Pad package
Operating supply voltage of 1.2V
ADSP-21478KSWZ-1A Applications
There are a lot of Analog Devices Inc. ADSP-21478KSWZ-1A DSP applications.
- Infrared
- Digital image processing
- Medical imaging
- Computers and laptop
- Vehicle electronics
- Digital image processing, data compression
- Tomography technology
- Other sensor array processing
- Fourier transform
- Automobile electronic gadgets
