ADSP-21479BBCZ-2A
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | CONTACT ADI (Last Updated: 1 week ago) |
| Contact Plating | Copper, Silver, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 196-LFBGA, CSPBGA |
| Surface Mount | YES |
| Number of Pins | 196 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | SHARC® |
| JESD-609 Code | e1 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 196 |
| Type | Floating Point |
| Terminal Finish | Tin/Silver/Copper (Sn96.5Ag3.0Cu0.5) |
| Additional Feature | ALSO OPEARTES AT 3.3 V I/O SUPPLY |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.8mm |
| Frequency | 266MHz |
| Base Part Number | ADSP-21479 |
| Pin Count | 196 |
| Operating Supply Voltage | 1.2V |
| Interface | DAI, DPI, EBI/EMI, I2C, SPI, SPORT, UART/USART |
| Max Supply Voltage | 1.26V |
| Min Supply Voltage | 1.14V |
| Memory Size | 512kB |
| RAM Size | 640kB |
| Memory Type | EPROM |
| Number of Bits | 32 |
| Data Bus Width | 32b |
| Core Architecture | SHARC |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Voltage - I/O | 3.30V |
| Number of UART Channels | 1 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Number of GPIO | 16 |
| Non-Volatile Memory | ROM (4Mbit) |
| Voltage - Core | 1.20V |
| On Chip Data RAM | 5Mbit |
| Number of SPI Channels | 2 |
| Height | 1.13mm |
| Length | 12.1mm |
| Width | 12.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADSP-21479BBCZ-2A Overview
It is a type of electronic component available in package 196-LFBGA, CSPBGA.A packaging way of Tray is provided.In addition to meeting a wide range of requirements, it is a member of Floating Point.The mounting is carried out in the direction of Surface Mount.By operating the device at the temperature of -40°C~85°C TA, a normal operation is ensured.Voltages can be input or output within 3.30V's analog voltage range.The SHARC? series includes this digital signal processor.For its use, it has 196 terminations.It is supplied with voltage by 1.2V.The 196 component has pins.The configuration of the device includes 196 pins.Several related parts can be identified using its base part number, ADSP-21479.In order for the device to operate at 266MHz frequency, there is a specific design.1.14V is the minimum voltage that can be supplied to this device.Devices like this can be powered by voltages up to 1.26V.This device is powered by a voltage of 1.2V.Its memory can store 512kB data.It is possible to configure the data format and transfer speed of 1 UART channels for synchronous serial communication.With this electronic part, additional features of ALSO OPEARTES AT 3.3 V I/O SUPPLY can also be provided.The architecture of this processor core is SHARC.It adopts EPROM as its memory type.The device contains 32 pieces of information.To communicate over short distances, this embedded system uses 2 SPI channels.In order to access the internal properties of the device, there are 16 GPIO acting as interfaces.
ADSP-21479BBCZ-2A Features
Supplied in the 196-LFBGA, CSPBGA package
Operating supply voltage of 1.2V
ADSP-21479BBCZ-2A Applications
There are a lot of Analog Devices Inc. ADSP-21479BBCZ-2A DSP applications.
- Real-time effects
- House construction
- Computer vision technology
- Electronic information engineering
- Digital camera
- Vehicle electronics
- Dam design
- Seismology
- Control systems
- Audio signal
