ADSP-21479KBCZ-1A
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | CONTACT ADI (Last Updated: 1 month ago) |
| Contact Plating | Copper, Silver, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 196-LFBGA, CSPBGA |
| Surface Mount | YES |
| Number of Pins | 196 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | SHARC® |
| JESD-609 Code | e1 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 196 |
| Type | Floating Point |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.8mm |
| Frequency | 266MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADSP-21479 |
| Pin Count | 196 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.2V |
| Interface | DAI, DPI, EBI/EMI, I2C, SPI, SPORT, UART/USART |
| Max Supply Voltage | 1.26V |
| Min Supply Voltage | 1.14V |
| Memory Size | 512kB |
| RAM Size | 640kB |
| Bit Size | 40 |
| Data Bus Width | 32b |
| Number of Timers/Counters | 2 |
| Address Bus Width | 24 |
| Core Architecture | SHARC |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Integrated Cache | YES |
| Voltage - I/O | 3.30V |
| Number of UART Channels | 1 |
| Number of GPIO | 16 |
| Non-Volatile Memory | ROM (4Mbit) |
| Voltage - Core | 1.20V |
| On Chip Data RAM | 5Mbit |
| Clock Rate | 200MHz |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADSP-21479KBCZ-1A Overview
In electronic terms, it is a type of component that comes in the package of type 196-LFBGA, CSPBGA .Packaging is provided in the form of Tray.Its Floating Point status makes it ideal for a wide range of applications.It is mounted in the way of Surface Mount.Keeping the device at the temperature of 0°C~70°C TA will ensure that it runs as it should.3.30V refers to the range of analog voltages that can be input or output.SHARC? series digital signal processors contain this digital signal processor.In order to use it, it has 196 terminations.Using 1.2V as the supply voltage, it operates.In this component, there are pins for 196.In its configuration, 196 pins can be found.The base part number ADSP-21479 can be used to identify many associated parts.266MHz is a frequency at which the device operates according to a specific design.The device can be classified under the subcategory Digital Signal Processors based on its specific characteristics.1.14V is the minimum voltage that can be supplied to this device.It can be supplied with a maximum voltage of 1.26V.1.2V is the supply voltage for this device.This device is able to store 512kB data in its memory.Data format and transmission speed can be configured for asynchronous serial communication on 1 UART channels.2 timers/counters are used to measure time and count external events.Using SHARC architecture, this processor core operates.GPIOs provide an easier way to access the device's internal properties through 16 GPIOs.
ADSP-21479KBCZ-1A Features
Supplied in the 196-LFBGA, CSPBGA package
Operating supply voltage of 1.2V
2 timers/counters
ADSP-21479KBCZ-1A Applications
There are a lot of Analog Devices Inc. ADSP-21479KBCZ-1A DSP applications.
- Computers and laptop
- Image signal processing
- Instrument modeling
- Biomedical engineering
- Compression of videos
- Automatic analysis system of EEG or ECG
- Seismology
- Other sensor array processing
- MP3 audio player
- 3D tomography and imaging processing
