ADSP-21479KBCZ-2A
| Parameters | |
|---|---|
| Pin Count | 196 |
| Operating Supply Voltage | 1.2V |
| Interface | DAI, DPI, EBI/EMI, I2C, SPI, SPORT, UART/USART |
| Max Supply Voltage | 1.26V |
| Min Supply Voltage | 1.14V |
| Memory Size | 512kB |
| RAM Size | 640kB |
| Memory Type | ROM |
| Bit Size | 40 |
| Data Bus Width | 32b |
| Core Architecture | SHARC |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Integrated Cache | YES |
| Voltage - I/O | 3.30V |
| Number of UART Channels | 1 |
| Number of GPIO | 16 |
| Non-Volatile Memory | ROM (4Mbit) |
| Voltage - Core | 1.20V |
| On Chip Data RAM | 5Mbit |
| Number of SPI Channels | 2 |
| Height | 1.13mm |
| Length | 12.1mm |
| Width | 12.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | CONTACT ADI (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 196-LFBGA, CSPBGA |
| Surface Mount | YES |
| Number of Pins | 196 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | SHARC® |
| JESD-609 Code | e1 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 196 |
| Type | Floating Point |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.8mm |
| Frequency | 266MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADSP-21479 |
ADSP-21479KBCZ-2A Overview
It is a kind of electronic component available in the 196-LFBGA, CSPBGA package.It is provided with a packaging way of Tray.Its Floating Point status makes it ideal for a wide range of applications.The mounting of the device is done in the direction of Surface Mount.It is essential that 0°C~70°C TA is kept at a temperature that ensures proper operation of the machine.The analog voltage range of 3.30V refers to the voltage that can be input or ouput.There are several digital signal processors in the SHARC? series, including this one.In order to use it, it has 196 terminations.Using 1.2V as the supply voltage, it operates.Pins are available on the 196 component.This configuration contains 196 pins.With its base part number of ADSP-21479, many related parts can be identified.266MHz is a frequency at which the device operates according to a specific design.This device can be classified into the subcategory Digital Signal Processors based on its specific characteristics.It is possible to supply as low a voltage as 1.14V to this device.Devices like this can be powered by voltages up to 1.26V.The device operates on a voltage of 1.2V as its supply voltage.Using this device, you can store 512kB data.There is a possibility to configure data formats and transmission speeds for 1 UART channels configured for asynchronous serial communication.Processor core SHARC adopts the SHARC architecture.Memory type ROM is used by it.2 SPI channels are used for short-range communication in this embedded system.16 GPIOs act as interfaces for easy access to the device's internals.
ADSP-21479KBCZ-2A Features
Supplied in the 196-LFBGA, CSPBGA package
Operating supply voltage of 1.2V
ADSP-21479KBCZ-2A Applications
There are a lot of Analog Devices Inc. ADSP-21479KBCZ-2A DSP applications.
- Sonar
- Streaming videos
- Finite impulse response digital filters
- Smart camera
- Monitoring equipment
- Voice recognition
- Digital communications
- Speech processing and recognition
- Audio compression
- Telephone conversations
