ADSP-21479KBCZ-3A
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | CONTACT ADI (Last Updated: 3 weeks ago) |
| Contact Plating | Copper, Silver, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 196-LFBGA, CSPBGA |
| Surface Mount | YES |
| Number of Pins | 196 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | SHARC® |
| JESD-609 Code | e1 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 196 |
| Type | Floating Point |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 266MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADSP-21479 |
| Pin Count | 196 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 1.3V |
| Interface | DAI, DPI, EBI/EMI, I2C, SPI, SPORT, UART/USART |
| Max Supply Voltage | 1.35V |
| Min Supply Voltage | 1.25V |
| Memory Size | 512kB |
| Speed | 300 MHz |
| RAM Size | 640kB |
| Bit Size | 40 |
| Data Bus Width | 32b |
| Number of Timers/Counters | 2 |
| Address Bus Width | 24 |
| Core Architecture | SHARC |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Integrated Cache | YES |
| Voltage - I/O | 3.30V |
| Number of UART Channels | 1 |
| Number of GPIO | 16 |
| Non-Volatile Memory | ROM (4Mbit) |
| Voltage - Core | 1.30V |
| On Chip Data RAM | 5Mbit |
| Clock Rate | 300MHz |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADSP-21479KBCZ-3A Overview
It is a kind of electronic component available in the 196-LFBGA, CSPBGA package.Packaging way Tray is provided.Floating Point's wide range of applications makes it ideal for a wide variety of applications.It is mounted in the way of Surface Mount.It is recommended that the device operate at a temperature of 0°C~70°C TA to ensure its normal operation.In analog circuits, the analog voltage range 3.30V represents the voltage range that is available for input or output.This digital signal processor is included into the SHARC? series.196 terminations are available for its use.It is supplied with voltage by 1.3V.In this component, there are pins for 196.There are 196 pins in its configuration.It is possible to identify numerous related parts using the base part number ADSP-21479.In order for the device to operate at 266MHz frequency, there is a specific design.According to its specific characteristics, this device is classified in the subcategory Digital Signal Processors.This device requires a minimum voltage of 1.25V.This device can handle a maximum voltage of 1.35V.In order for it to operate, 1.3V is the supply voltage.Its memory can store 512kB data.It is possible to configure the data format and transfer speed of 1 UART channels for synchronous serial communication.2 timers/counters are used to measure time and count external events.A SHARC-architecture processor core is used here.16 GPIOs act as interfaces for easy access to the device's internals.
ADSP-21479KBCZ-3A Features
Supplied in the 196-LFBGA, CSPBGA package
Operating supply voltage of 1.3V
2 timers/counters
ADSP-21479KBCZ-3A Applications
There are a lot of Analog Devices Inc. ADSP-21479KBCZ-3A DSP applications.
- Smart camera
- Remote sensing image processing technology
- Electronic information engineering
- Seismology
- Automobile electronic gadgets
- Speech processing
- Real-time effects
- Digital hardware
- Automatic analysis system of EEG or ECG
- Sound navigation and ranging systems
