ADSP-21488KSWZ-3B
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 176-LQFP Exposed Pad |
| Number of Pins | 176 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | SHARC® |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 176 |
| Type | Floating Point |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.1V |
| Terminal Pitch | 0.5mm |
| Frequency | 400MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADSP-21488 |
| Pin Count | 176 |
| Operating Supply Voltage | 3.3V |
| Interface | EBI/EMI, DAI, I2C, SPI, SPORT, UART/USART |
| Max Supply Voltage | 3.47V |
| Min Supply Voltage | 1.05V |
| Memory Size | 5MB |
| Number of I/O | 16 |
| RAM Size | 384kB |
| Memory Type | RAM |
| Bit Size | 40 |
| Data Bus Width | 32b |
| Number of Timers/Counters | 3 |
| Density | 4 Mb |
| Core Architecture | SHARC |
| Boundary Scan | YES |
| Low Power Mode | NO |
| Integrated Cache | YES |
| Voltage - I/O | 3.30V |
| Non-Volatile Memory | External |
| Voltage - Core | 1.10V |
| On Chip Data RAM | 3Mbit |
| Number of SPI Channels | 1 |
| Clock Rate | 350MHz |
| Height | 1.45mm |
| Length | 24.1mm |
| Width | 24.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADSP-21488KSWZ-3B Overview
Basically, it is a type of electronic component that is available in a 176-LQFP Exposed Pad package.There is a packaging method of Tray provided with it.Due to its Floating Point membership, it is ideal for a wide range of applications.It is mounted in the direction of Surface Mount as shown in the image below.Keeping the device at the temperature of 0°C~70°C TA will ensure that it runs as it should.As the name implies, the analog voltage range of 3.30V refers to the voltage that can be inserted or removed.Digital signal processors such as this one are included in the SHARC? series.176 terminations are available for its use.It is supplied with voltage by 1.1V.176 component pins are present.The configuration of this board includes 176 pins.Based on its base part number of ADSP-21488, many ralated parts can be found.In order for the device to operate at 400MHz frequency, there is a specific design.In order to mount it, it utiliSurface Mountes the Surface Mount method.This device falls into the subcategory of Digital Signal Processors based on its specific characteristics.This device operates at a voltage as low as 1.05V.This device can handle a maximum voltage of 3.47V.A supply voltage of 3.3V is required for its operation.5MB data can be stored in the memory of this device.Counting external events and measuring time are done by 3 timers/counters.It is based on the SHARC architecture.It is equipped with 16 I/Os.RAM is the type of memory it uses.The embedded system uses short-range 1 SPI channels for communication.
ADSP-21488KSWZ-3B Features
Supplied in the 176-LQFP Exposed Pad package
Operating supply voltage of 3.3V
3 timers/counters
16 I/Os
ADSP-21488KSWZ-3B Applications
There are a lot of Analog Devices Inc. ADSP-21488KSWZ-3B DSP applications.
- Scene analysis technology
- Smart phones
- House construction
- Vehicle electronics
- Digital hardware
- Biomedical engineering
- MP3 audio player
- Encoding/broadcast
- Computers and laptop
- Digital image processing
