ADSP-21489BSWZ-3A
| Parameters | |
|---|---|
| On Chip Data RAM | 5Mbit |
| Number of SPI Channels | 2 |
| Clock Rate | 350MHz |
| Height | 1.45mm |
| Length | 14.2mm |
| Width | 14.2mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP Exposed Pad |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | SHARC® |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 100 |
| Type | Floating Point |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.1V |
| Terminal Pitch | 0.5mm |
| Frequency | 450MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADSP-21489 |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Interface | EBI/EMI, DAI, I2C, SPI, SPORT, UART/USART |
| Max Supply Voltage | 3.47V |
| Min Supply Voltage | 3.13V |
| Number of I/O | 16 |
| RAM Size | 640kB |
| Memory Type | ROMless |
| Bit Size | 40 |
| Data Bus Width | 32b |
| Number of Timers/Counters | 3 |
| Core Architecture | SHARC |
| Boundary Scan | YES |
| Low Power Mode | NO |
| Integrated Cache | YES |
| Voltage - I/O | 3.30V |
| Number of I2C Channels | 1 |
| Non-Volatile Memory | External |
| Voltage - Core | 1.10V |
ADSP-21489BSWZ-3A Overview
It is a kind of electronic component that comes in a package of 100-LQFP Exposed Pad.Packaging method Tray is provided.Floating Point members are well suited for a wide range of applications.In order to mount it, it must be in the direction of Surface Mount.As long as it is operated at the temperature of -40°C~85°C TA, it will operate normally.The analog voltage range of 3.30V refers to the voltage that can be input or ouput.Digital signal processors such as this one are included in the SHARC? series.There are 100 terminations for its uses.A voltage of 1.1V is used as the supply voltage.The 100 component has pins.In its configuration, 100 pins can be found.There are a number of related parts that can be identified using the base part number ADSP-21489.In order for the device to operate at the frequency of 450MHz, it has been designed specifically.The mounting method is Surface Mount.According to its specific characteristics, this device is classified in the subcategory Digital Signal Processors.Devices like this can be powered with as little as 3.13V volts.The maximum voltage supplied to this device amounts to 3.47V.This device is powered by a voltage of 3.3V.Time and external events are measured and counted with 3 timers/counters.Using SHARC architecture, this processor core operates.There are 16 inputs and outputs on the device.The memory type adopted by it is ROMless.Short-range communication is achieved using 2 SPI channels in this embedded system.In order to establish communication between more ICs, 1 I2C channels are used.
ADSP-21489BSWZ-3A Features
Supplied in the 100-LQFP Exposed Pad package
Operating supply voltage of 3.3V
3 timers/counters
16 I/Os
ADSP-21489BSWZ-3A Applications
There are a lot of Analog Devices Inc. ADSP-21489BSWZ-3A DSP applications.
- Financial signals
- Audio synthesis
- 3D tomography and imaging processing
- Remote sensing image processing technology
- Dam design
- Automatic analysis system of EEG or ECG
- Computer vision technology
- Tomography technology
- Biometrics
- Automobiles
