ADSP-21489BSWZ-3B
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 176-LQFP Exposed Pad |
| Number of Pins | 176 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | SHARC® |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 176 |
| Type | Floating Point |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.1V |
| Terminal Pitch | 0.5mm |
| Frequency | 350MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADSP-21489 |
| Pin Count | 176 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Interface | EBI/EMI, DAI, I2C, SPI, SPORT, UART/USART |
| Max Supply Voltage | 3.47V |
| Min Supply Voltage | 1.05V |
| Number of I/O | 16 |
| RAM Size | 640kB |
| Memory Type | ROMless |
| Number of Bits | 32 |
| Bit Size | 40 |
| Data Bus Width | 32b |
| Number of Timers/Counters | 3 |
| Core Architecture | SHARC |
| Boundary Scan | YES |
| Low Power Mode | NO |
| Integrated Cache | YES |
| Voltage - I/O | 3.30V |
| Number of I2C Channels | 1 |
| Non-Volatile Memory | External |
| Voltage - Core | 1.10V |
| On Chip Data RAM | 5Mbit |
| Number of SPI Channels | 2 |
| Height | 1.45mm |
| Length | 24.1mm |
| Width | 24.1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADSP-21489BSWZ-3B Overview
It is a type of electronic component available in package 176-LQFP Exposed Pad.Packaging way Tray is provided.Due to its membership in Floating Point, it is ideally suited for a wide range of uses.It is mounted in the direction of Surface Mount as shown in the image below.As long as it is operated at the temperature of -40°C~85°C TA, it will operate normally.The digital voltage range of 3.30V refers to the voltage that can be input or output.SHARC? series digital signal processors contain this digital signal processor.176 terminations are available for its use.It works with a voltage of 1.1V as a supply voltage.Pins are available on the 176 component.176 pins can be found in its configuration.By using its base part number of ADSP-21489, many related parts can be identified.It is specifically designed to operate with the frequency of 350MHz.It adopts Surface Mount as its mounting way.This device falls into the subcategory of Digital Signal Processors based on its specific characteristics.This device operates at a voltage as low as 1.05V.It can be supplied with a maximum voltage of 3.47V.Using 3.3V as the supply voltage, it operates.Timer/counters for measuring and counting external events are called 3 timers or counters.Using SHARC architecture, this processor core operates.16 I/Os are included with the device.ROMless is the type of memory it uses.In the device are 32 pieces of information.A short-distance communication channel is used in this embedded system. The channels are 2 SPI.1 I2C channels are used to communicate between more ICs.
ADSP-21489BSWZ-3B Features
Supplied in the 176-LQFP Exposed Pad package
Operating supply voltage of 3.3V
3 timers/counters
16 I/Os
ADSP-21489BSWZ-3B Applications
There are a lot of Analog Devices Inc. ADSP-21489BSWZ-3B DSP applications.
- Biomedical treatment
- Biomedical engineering
- MP3 audio player
- Receivers
- Tomography technology
- Dam design
- Sonar
- Audio synthesis
- Automatic analysis system of EEG or ECG
- Infrared
