ADSP-21489KSWZ-4A
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP Exposed Pad |
| Number of Pins | 100 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | SHARC® |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Type | Floating Point |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Supply Voltage | 1.1V |
| Terminal Pitch | 0.5mm |
| Frequency | 400MHz |
| Base Part Number | ADSP-21489 |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Interface | EBI/EMI, DAI, I2C, SPI, SPORT, UART/USART |
| Max Supply Voltage | 3.47V |
| Min Supply Voltage | 1.05V |
| Number of I/O | 16 |
| RAM Size | 640kB |
| Memory Type | ROMless |
| Number of Bits | 32 |
| Bit Size | 40 |
| Data Bus Width | 32b |
| Number of Timers/Counters | 3 |
| Core Architecture | SHARC |
| Boundary Scan | YES |
| Low Power Mode | NO |
| Integrated Cache | YES |
| Voltage - I/O | 3.30V |
| Number of I2C Channels | 1 |
| Non-Volatile Memory | External |
| Voltage - Core | 1.10V |
| On Chip Data RAM | 5Mbit |
| Number of SPI Channels | 2 |
| Height | 1.45mm |
| Length | 14.2mm |
| Width | 14.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADSP-21489KSWZ-4A Overview
An electronic component available in package 100-LQFP Exposed Pad.Packaging method Tray is provided.As a member of Floating Point, it is ideally suitable for a wide range of applications.The mounting is carried out in the direction of Surface Mount.By operating the device at the temperature of 0°C~70°C TA, a normal operation is ensured.The analog voltage range of 3.30V refers to the input or output voltage.The SHARC? series contains this digital signal processor.The uses of this product can be terminated with 100.It is supplied with voltage by 1.1V.There are 100 component pins.100 pins can be found in its configuration.Based on its base part number of ADSP-21489, many ralated parts can be found.The device is specifically designed to operate at the frequency of 400MHz.In order to mount it, it utiliSurface Mountes the Surface Mount method.On the basis of its specific characteristics, this device can be classified as a Digital Signal Processors device.This device operates at a voltage as low as 1.05V.This device can handle a maximum voltage of 3.47V.Using 3.3V as the supply voltage, it operates.To measure time and count events externally, 3 timers/counters are used.A SHARC-architecture processor core is used here.It is equipped with 16 I/Os.It uses ROMless as its memory type.The device contains 32 pieces of information.The short-distance communication of this embedded system is performed over 2 SPI channels.The 1 I2C channel is used to establish communication between more Ics.
ADSP-21489KSWZ-4A Features
Supplied in the 100-LQFP Exposed Pad package
Operating supply voltage of 3.3V
3 timers/counters
16 I/Os
ADSP-21489KSWZ-4A Applications
There are a lot of Analog Devices Inc. ADSP-21489KSWZ-4A DSP applications.
- Image compression
- Digital camera
- Processing system
- Other sensor array processing
- Vehicle electronics
- Finite impulse response digital filters
- Scene analysis technology
- Financial signals
- Computer vision technology
- Video coding, audio coding
