ADSP-2181BS-115
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PQFP |
| Number of Pins | 128 |
| Packaging | Bulk |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | TIN LEAD |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | 33 MIPS SUSTAINED; SINGLE CYCLE INSTRUCTION EXECUTION |
| HTS Code | 8542.31.00.01 |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 28.8MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 128 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| RAM Size | 80kB |
| uPs/uCs/Peripheral ICs Type | DIGITAL SIGNAL PROCESSOR, OTHER |
| Supply Current-Max | 100mA |
| Bit Size | 16 |
| Frequency (Max) | 28.8MHz |
| Data Bus Width | 16b |
| Address Bus Width | 14 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| Format | FIXED POINT |
| Integrated Cache | NO |
| RAM (words) | 16000 |
| Number of Serial I/Os | 2 |
| Number of Timers | 1 |
| Number of External Interrupts | 4 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| On Chip Data RAM Width | 16 |
| Number of DMA Channels | 2 |
| Height Seated (Max) | 4.07mm |
| Length | 28mm |
| RoHS Status | RoHS Compliant |
ADSP-2181BS-115 Overview
It is a type of electronic component available in package PQFP.Packaging way Bulk is provided.Its uses have 128 terminations.It is supplied with voltage by 5V.Pins are located on the 128 component.In its configuration, it contains 128 pins.The device is specifically designed to operate at the frequency of 28.8MHz.Surface Mount is used as the mounting method.The specific characteristics of this device can be categoriDigital Signal Processorsed within the Digital Signal Processors subcategory.4.5V is the minimum voltage that can be supplied to this device.There is a maximum voltage supply of 5.5V to this device.The device operates with a supply voltage of 5V.Electricity is provided by 5V.With this electronic part, additional features of 33 MIPS SUSTAINED; SINGLE CYCLE INSTRUCTION EXECUTION can also be provided.This system uses DIGITAL SIGNAL PROCESSOR, OTHER as its uPs, uCs, and peripheral ICs.A lower operating temperature than 85°C is recommended.-40°C should be exceeded as the operating temperature.Industrial environments have 1 timers that provide accurate feedback and trigger events.A source external to the system causes 4 interrupts.Below 28.8MHz should be the maximum value of its frequency.Using 2 DMA channels, data can be transferred without overloading the CPU.A 2 serial I/O communicates data between two devices.
ADSP-2181BS-115 Features
Supplied in the PQFP package
Operating supply voltage of 5V
DIGITAL SIGNAL PROCESSOR, OTHER as uPs/uCs/Peripheral Ics
4 external interrupts
ADSP-2181BS-115 Applications
There are a lot of Analog Devices, Inc. ADSP-2181BS-115 DSP applications.
- Vibration signal processing
- Compression of videos
- Signal processing for telecommunications
- Audio
- Infinite impulse response filters
- Infrared
- Statistical signal processing
- Encoding/broadcast
- Fourier transform
- Streaming music
