ADSP-2181KST-115
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 128 |
| Packaging | Bulk |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | TIN LEAD |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | 33 MIPS SUSTAINED; SINGLE CYCLE INSTRUCTION EXECUTION |
| HTS Code | 8542.31.00.01 |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Frequency | 28.8MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 128 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| RAM Size | 80kB |
| uPs/uCs/Peripheral ICs Type | DIGITAL SIGNAL PROCESSOR, OTHER |
| Supply Current-Max | 100mA |
| Bit Size | 16 |
| Address Bus Width | 14 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| External Data Bus Width | 24 |
| Format | FIXED POINT |
| Integrated Cache | NO |
| RAM (words) | 16000 |
| Number of Serial I/Os | 2 |
| Number of Timers | 1 |
| Number of External Interrupts | 4 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| On Chip Data RAM Width | 16 |
| Number of DMA Channels | 2 |
| Capacitance - Input | 8pF |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| RoHS Status | Non-RoHS Compliant |
ADSP-2181KST-115 Overview
This is an electronic component with a LQFP package.Bulk packaging is provided for it.There are 128 terminations for its uses.A voltage of 5V is used as the supply voltage.Pins are available on the 128 component.This configuration contains 128 pins.In order for the device to operate at the frequency of 28.8MHz, it has been designed specifically.As a mounting method, it uses Surface Mount.The characteristics of this device allow it to be placed in the subcategory of Digital Signal Processors.In order to power this device, a voltage as low as 4.5V needs to be supplied.It is capable of receiving a maximum voltage of 5.5V.This device is powered by 5V's supply voltage.Electricity is provided by 5V.More additional features of 33 MIPS SUSTAINED; SINGLE CYCLE INSTRUCTION EXECUTION can also be provided by this electronic part.A DIGITAL SIGNAL PROCESSOR, OTHER type UP/UC/Peripheral IC is employed in its uP/UC/Peripheral ICs.It is recommended to keep the operating temperature below 70°C.0°C should be exceeded as the operating temperature.1 timers are used in industrial environments to provide accurate feedback and event activation.A source external to the system causes 4 interrupts.To prevent CPU overload, 2 DMA channels are used to transfer data.Using 2 serial interfaces, data can be communicated between devices.
ADSP-2181KST-115 Features
Supplied in the LQFP package
Operating supply voltage of 5V
DIGITAL SIGNAL PROCESSOR, OTHER as uPs/uCs/Peripheral Ics
4 external interrupts
ADSP-2181KST-115 Applications
There are a lot of Analog Devices, Inc. ADSP-2181KST-115 DSP applications.
- Boats
- Geoscience signal processing
- Speech processing
- Vehicle electronics
- Machinery and equipment
- Sonar
- Voice recognition
- Digital hardware
- Consumer electronic gadgets
- Real-time effects
