ADSP-2181KSTZ-160
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 128-LQFP |
| Number of Pins | 128 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | ADSP-21xx |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 128 |
| Type | Fixed Point |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADSP-2181 |
| Pin Count | 128 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | Synchronous Serial Port (SSP) |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| RAM Size | 32kB |
| Memory Type | ROMless |
| Number of Bits | 16 |
| Bit Size | 16 |
| Data Bus Width | 16b |
| Number of Timers/Counters | 1 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| Integrated Cache | NO |
| Voltage - I/O | 5.00V |
| Number of Serial I/Os | 2 |
| Number of External Interrupts | 4 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | External |
| On Chip Data RAM | 80kB |
| Number of DMA Channels | 2 |
| Height | 1.5mm |
| Length | 20.1mm |
| Width | 14.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADSP-2181KSTZ-160 Overview
In electronic terms, it is a type of component that comes in the package of type 128-LQFP .Tray packaging is provided for it.As a member of Fixed Point, it is ideally suitable for a wide range of applications.It is mounted in the way of Surface Mount.It is recommended that the device operate at a temperature of 0°C~70°C TA to ensure its normal operation.The analog voltage range of 5.00V refers to the voltage that can be input or ouput.Digital signal processors such as this one are included in the ADSP-21xx series.There are 128 terminations for its uses.It operates with the supply voltage of 5V.There are pins on the 128 component.Its configuration includes 128 pins.Several related parts can be identified using its base part number, ADSP-2181.In order for the device to operate at 40MHz frequency, there is a specific design.Mounting is accomplished using Surface Mount.The characteristics of this device allow it to be placed in the subcategory of Digital Signal Processors.This device operates at a voltage as low as 4.5V.The maximum voltage for this device is 5.5V.This device is powered by 5V's supply voltage.It receives electricity from 5V.Counting external events and measuring time are done by 1 timers/counters.It uses the ROMless memory type.A source external to the system causes 4 interrupts.There are 16 information stored in the device.2 DMA channels transfer data without overloading the CPU.Serial 2 I/Os are used to communicate data between devices.
ADSP-2181KSTZ-160 Features
Supplied in the 128-LQFP package
Operating supply voltage of 5V
1 timers/counters
4 external interrupts
ADSP-2181KSTZ-160 Applications
There are a lot of Analog Devices Inc. ADSP-2181KSTZ-160 DSP applications.
- Infinite impulse response filters
- Image signal processing
- House construction
- Signal processing for telecommunications
- Radio detection and rangin systems
- Boats
- Digital image processing
- Streaming music
- Seismology
- Financial signals
