ADSP-2181KSZ-160
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 128-BFQFP |
| Number of Pins | 128 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | ADSP-21xx |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 128 |
| Type | Fixed Point |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 40MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADSP-2181 |
| Pin Count | 128 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | Synchronous Serial Port (SSP) |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| RAM Size | 32kB |
| Memory Type | RAM |
| Number of Bits | 16 |
| Bit Size | 16 |
| Data Bus Width | 16b |
| Number of Timers/Counters | 1 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| Integrated Cache | NO |
| Voltage - I/O | 5.00V |
| Number of Serial I/Os | 2 |
| Number of External Interrupts | 4 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | External |
| On Chip Data RAM | 80kB |
| Number of DMA Channels | 2 |
| Height | 3.4mm |
| Length | 28mm |
| Width | 28mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADSP-2181KSZ-160 Overview
It is a kind of electronic component that comes in a package of 128-BFQFP.Packaging way Tray is provided.Its Fixed Point status makes it ideal for a wide range of applications.In order to mount it, it must be in the direction of Surface Mount.At the temperature of 0°C~70°C TA, the device is guaranteed to operate normally.The digital voltage range of 5.00V refers to the voltage that can be input or output.The ADSP-21xx series incorporates this digital signal processor.128 terminations are available for its use.The voltage supplied by 5V is used to operate it.There are 128 component pins.An overview of its configuration can be found in the section on 128 pins.By using its base part number of ADSP-2181, many related parts can be identified.A specific design is present for the device in order for it to operate at the frequency of 40MHz.In order to mount it, it utiliSurface Mountes the Surface Mount method.The device can be classified under the subcategory Digital Signal Processors based on its specific characteristics.This device requires a minimum voltage of 4.5V.It can be supplied with a maximum voltage of 5.5V.In order for it to operate, 5V is the supply voltage.It is supplied with 5V electric power.Time and external events are measured and counted with 1 timers/counters.It uses RAM as its memory type.Interrupts caused by an external source cause 4 interrupts.Data is stored in the device in 16 formats.2 DMA channels transfer data without overloading the CPU.A 2 serial I/O communicates data between two devices.
ADSP-2181KSZ-160 Features
Supplied in the 128-BFQFP package
Operating supply voltage of 5V
1 timers/counters
4 external interrupts
ADSP-2181KSZ-160 Applications
There are a lot of Analog Devices Inc. ADSP-2181KSZ-160 DSP applications.
- Financial signals
- Electronic information engineering
- Compression of videos
- Encoding/broadcast
- Airplanes
- Digital communications
- Fourier transform
- Receivers
- Sound navigation and ranging systems
- Dam design
