ADSP-2185NKSTZ-320
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 100-LQFP |
| Number of Pins | 100 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | ADSP-21xx |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Type | Fixed Point |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
| Frequency | 80MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADSP-2185 |
| Pin Count | 100 |
| Operating Supply Voltage | 1.8V |
| Interface | Host Interface, Serial Port |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.71V |
| Number of I/O | 8 |
| RAM Size | 80kB |
| Memory Type | ROMless |
| Number of Bits | 16 |
| Bit Size | 16 |
| Data Bus Width | 16b |
| Number of Timers/Counters | 1 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| Voltage - I/O | 1.8V 2.5V 3.3V |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | External |
| Voltage - Core | 1.80V |
| Height | 1.45mm |
| Length | 14.05mm |
| Width | 14.05mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADSP-2185NKSTZ-320 Overview
It is a type of electronic component available in package 100-LQFP.Packaging is provided in the form of Tray.As a member of Fixed Point, it is ideally suitable for a wide range of applications.In order to mount it, it must be in the direction of Surface Mount.By operating the device at the temperature of 0°C~70°C TA, a normal operation is ensured.The analog voltage range of 1.8V 2.5V 3.3V refers to the voltage that can be input or ouput.The ADSP-21xx series contains this digital signal processor.The 100 terminations are used for its uses.This device is powered by 1.8V's supply voltage.Pins are located on the 100 component.This configuration contains 100 pins.Many related parts can be identified by using the ADSP-2185 part number as a base.The device operates at the frequency of 80MHz in accordance with a specific design.In order to mount it, it utiliSurface Mountes the Surface Mount method.The device can be classified under the subcategory Digital Signal Processors based on its specific characteristics.In this device, the minimum voltage is 1.71V.3.6V is the maximum voltage that can be supplied to this device.This device is powered by a voltage of 1.8V.External events are tracked and measured with 1 timers/counters.The device has 8 I/Os.ROMless is its memory type.Upon opening the device, there are 16 pieces of information stored.
ADSP-2185NKSTZ-320 Features
Supplied in the 100-LQFP package
Operating supply voltage of 1.8V
1 timers/counters
8 I/Os
ADSP-2185NKSTZ-320 Applications
There are a lot of Analog Devices Inc. ADSP-2185NKSTZ-320 DSP applications.
- Automatic analysis system of EEG or ECG
- Encoding/broadcast
- Infrared
- Vehicle electronics
- Radio detection and rangin systems
- Statistical signal processing
- Image compression
- Telephone conversations
- Seismology
- MP3 audio player
