ADSP-2186LBST-115
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 100 |
| Packaging | Bulk |
| JESD-609 Code | e0 |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 100 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Tin/Lead (Sn85Pb15) - with Silver (Ag) barrier |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.31.00.01 |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | not_compliant |
| Frequency | 28.8MHz |
| Pin Count | 100 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| RAM Size | 40kB |
| uPs/uCs/Peripheral ICs Type | DIGITAL SIGNAL PROCESSOR, OTHER |
| Frequency (Max) | 28.8MHz |
| Data Bus Width | 16b |
| Address Bus Width | 14 |
| On Chip Program ROM Width | 24 |
| Boundary Scan | NO |
| Low Power Mode | YES |
| Format | FLOATING-POINT |
| Integrated Cache | NO |
| RAM (words) | 8000 |
| ROM Programmability | FLASH |
| Number of External Interrupts | 6 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| On Chip Data RAM Width | 16 |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| RoHS Status | Non-RoHS Compliant |
ADSP-2186LBST-115 Overview
It is a kind of electronic component that comes in a package of LQFP.The packaging way is Bulk.For its use, it has 100 terminations.The voltage supplied by 3.3V is used to operate it.There are 100 component pins.In its configuration, it contains 100 pins.It is specifically designed to operate with the frequency of 28.8MHz.The mounting method of the device is Surface Mount.The minimum voltage supplied to this device is as low as 3V.This device can handle a maximum voltage of 3.6V.A supply voltage of 3.3V is required for its operation.DIGITAL SIGNAL PROCESSOR, OTHER is used as uPs/uCs/peripheral ICs.It is recommended that the operating temperature be lower than 85°C.Temperatures should exceed -40°C during operation.6 interrupts are caused by external sources.Below 28.8MHz is the maximum frequency that should be used.
ADSP-2186LBST-115 Features
Supplied in the LQFP package
Operating supply voltage of 3.3V
DIGITAL SIGNAL PROCESSOR, OTHER as uPs/uCs/Peripheral Ics
6 external interrupts
ADSP-2186LBST-115 Applications
There are a lot of Analog Devices, Inc. ADSP-2186LBST-115 DSP applications.
- Statistical signal processing
- Receivers
- Audio signal
- Compression of videos
- Boats
- Financial signals
- Audio
- Airplanes
- Digital image processing
- Smart camera
