ADSP-2191MBSTZ-140
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 144-LQFP |
| Number of Pins | 144 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | ADSP-21xx |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 144 |
| Type | Fixed Point |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 0.5mm |
| Frequency | 140MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADSP-2191 |
| Pin Count | 144 |
| Operating Supply Voltage | 2.5V |
| Interface | Host Interface, SPI, SSP, UART |
| Max Supply Voltage | 3.63V |
| Min Supply Voltage | 2.37V |
| RAM Size | 160kB |
| Memory Type | ROMless |
| Number of Bits | 16 |
| Bit Size | 16 |
| Data Bus Width | 16b |
| Number of Timers/Counters | 3 |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Voltage - I/O | 3.00V 3.30V |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | External |
| Voltage - Core | 2.50V |
| Number of SPI Channels | 2 |
| Height | 1.45mm |
| Length | 20mm |
| Width | 20mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADSP-2191MBSTZ-140 Overview
In electronic terms, it is a type of component that comes in the package of type 144-LQFP .Tray packaging is provided for it.Due to its Fixed Point membership, it is ideal for a wide range of applications.Surface Mount is the direction in which it is mounted.At the temperature of -40°C~85°C TA, the device is guaranteed to operate normally.The digital voltage range of 3.00V 3.30V refers to the voltage that can be input or output.This digital signal processor is included into the ADSP-21xx series.Its uses have 144 terminations.The supply voltage is 2.5V.Pins are present on the 144 component.An overview of its configuration can be found in the section on 144 pins.With its base part number ADSP-2191, it is possible to identify a number of related parts.140MHz is a frequency at which the device operates according to a specific design.A Surface Mount mounting method is used for its mounting.The specific characteristics of this device can be categoriDigital Signal Processorsed within the Digital Signal Processors subcategory.Devices like this can be powered with as little as 2.37V volts.The maximum voltage supplied to this device amounts to 3.63V.The device operates on a voltage of 2.5V as its supply voltage.3 timers/counters are used to measure time and count external events.As far as memory type is concerned, it uses ROMless.This device stores 16 information.In this embedded system, 2 SPI channels are used for short-distance communication.
ADSP-2191MBSTZ-140 Features
Supplied in the 144-LQFP package
Operating supply voltage of 2.5V
3 timers/counters
ADSP-2191MBSTZ-140 Applications
There are a lot of Analog Devices Inc. ADSP-2191MBSTZ-140 DSP applications.
- Geoscience signal processing
- Other sensor array processing
- Processing system
- Automobiles
- Spectral density estimation
- Computers and laptop
- Smart camera
- Financial signals
- Medical imaging
- Vibration signal processing
