ADSP-BF514BSWZ-4F4
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 176-LQFP Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 176 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | Blackfin® |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 176 |
| Type | Fixed Point |
| HTS Code | 8542.31.00.01 |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 1.4V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | unknown |
| Frequency | 400MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ADSP-BF514 |
| Pin Count | 176 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Interface | I2C, PPI, RSI, SPI, SPORT, UART/USART |
| Max Supply Voltage | 7.1V |
| Min Supply Voltage | 1.164V |
| Memory Size | 116kB |
| Number of I/O | 40 |
| RAM Size | 48kB |
| Bit Size | 32 |
| Data Bus Width | 16b |
| Number of Timers/Counters | 9 |
| Address Bus Width | 19 |
| Core Architecture | Blackfin |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Voltage - I/O | 1.8V 2.5V 3.3V |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | FLASH (4Mbit) |
| Voltage - Core | 1.30V |
| Height Seated (Max) | 1.6mm |
| Length | 24mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADSP-BF514BSWZ-4F4 Overview
It is a type of electronic component available in package 176-LQFP Exposed Pad.Packaging way Tray is provided.With its association with Fixed Point, it is suitable for a wide range of applications.The device is attached in a way that faces Surface Mount.By operating the device at the temperature of -40°C~85°C TA, a normal operation is ensured.The analog voltage range of 1.8V 2.5V 3.3V refers to the voltage that can be input or ouput.This digital signal processor is included into the Blackfin? series.The uses of this product can be terminated with 176.Using 1.4V as the supply voltage, it operates.There are 176 component pins.In its configuration, there are 176 pins.With its base part number ADSP-BF514, it is possible to identify a number of related parts.To operate at 400MHz frequency, the device has a specific design.On the basis of its specific characteristics, this device can be classified as a Microprocessors device.This device requires a minimum voltage of 1.164V.7.1V is the maximum voltage that can be supplied to this device.A supply voltage of 3.3V is required for its operation.Its memory can be used to store 116kB data.External events are tracked and measured with 9 timers/counters.This processor core adopts the architecture of Blackfin.40 I/Os are included with the device.
ADSP-BF514BSWZ-4F4 Features
Supplied in the 176-LQFP Exposed Pad package
Operating supply voltage of 3.3V
9 timers/counters
40 I/Os
ADSP-BF514BSWZ-4F4 Applications
There are a lot of Analog Devices Inc. ADSP-BF514BSWZ-4F4 DSP applications.
- Seismology
- TVs
- Geophysical processing
- Finite impulse response digital filters
- Consumer electronic gadgets
- Electronic information engineering
- Audio synthesis
- Control systems
- Machinery and equipment
- Computers and laptop
