ADSP-BF516BSWZ-4
| Parameters | |
|---|---|
| Type | Fixed Point |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.4V |
| Terminal Pitch | 0.5mm |
| Frequency | 400MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADSP-BF516 |
| Pin Count | 176 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Interface | Ethernet, I2C, PPI, RSI, SPI, SPORT, UART/USART |
| Max Supply Voltage | 7.1V |
| Min Supply Voltage | 1.164V |
| Memory Size | 116kB |
| Number of I/O | 40 |
| RAM Size | 48kB |
| Bit Size | 32 |
| Data Bus Width | 16b |
| Number of Timers/Counters | 9 |
| Address Bus Width | 19 |
| Density | 16 Mb |
| Core Architecture | Blackfin |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Voltage - I/O | 1.8V 2.5V 3.3V |
| Number of UART Channels | 2 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | External |
| Voltage - Core | 1.30V |
| Height Seated (Max) | 1.6mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 176-LQFP Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 176 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | Blackfin® |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 176 |
ADSP-BF516BSWZ-4 Overview
This is an electronic component with a 176-LQFP Exposed Pad package.It is provided with a packaging way of Tray.As a member of Fixed Point, it is ideally suitable for a wide range of applications.The mounting of the device is done in the direction of Surface Mount.The operation of the device at the temperature of -40°C~85°C TA ensures the normal operation of the device.Voltages can be input or output within 1.8V 2.5V 3.3V's analog voltage range.Blackfin? series digital signal processors contain this digital signal processor.The terminations for its uses are 176.The voltage supplied by 1.4V is used to operate it.There are pins on the 176 component.In its configuration, it contains 176 pins.Based on its base part number of ADSP-BF516, many ralated parts can be found.Specifically, the device is designed to operate at a frequency of 400MHz.According to its specific characteristics, this device is classified in the subcategory Microprocessors.In this device, the minimum voltage is 1.164V.It is capable of receiving a maximum voltage of 7.1V.In order for it to operate, 3.3V is the supply voltage.Using this device, you can store 116kB data.The 2 UART channels support synchronous serial communication with configurable data formats and rates.Timer/counters for measuring and counting external events are called 9 timers or counters.The processor core uses the architecture of the Blackfin processor.40 I/Os are present on the device.
ADSP-BF516BSWZ-4 Features
Supplied in the 176-LQFP Exposed Pad package
Operating supply voltage of 3.3V
9 timers/counters
40 I/Os
ADSP-BF516BSWZ-4 Applications
There are a lot of Analog Devices Inc. ADSP-BF516BSWZ-4 DSP applications.
- Biometrics
- Audio compression
- Scene analysis technology
- Smart phones
- Streaming music
- Finite impulse response digital filters
- Machinery and equipment
- Processing system
- Audio
- Digital communications
