ADSP-BF516KBCZ-4
| Parameters | |
|---|---|
| Boundary Scan | YES |
| Low Power Mode | YES |
| Voltage - I/O | 1.8V 2.5V 3.3V |
| Number of UART Channels | 2 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | External |
| Voltage - Core | 1.30V |
| Height Seated (Max) | 1.7mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 168-LFBGA, CSPBGA |
| Surface Mount | YES |
| Number of Pins | 168 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | Blackfin® |
| JESD-609 Code | e1 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 168 |
| Type | Fixed Point |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.4V |
| Terminal Pitch | 0.8mm |
| Frequency | 400MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADSP-BF516 |
| Pin Count | 168 |
| Operating Supply Voltage | 3.3V |
| Interface | Ethernet, I2C, PPI, RSI, SPI, SPORT, UART/USART |
| Max Supply Voltage | 7.1V |
| Min Supply Voltage | 1.164V |
| Memory Size | 116kB |
| Number of I/O | 40 |
| RAM Size | 112kB |
| Bit Size | 32 |
| Data Bus Width | 16b |
| Number of Timers/Counters | 9 |
| Address Bus Width | 19 |
| Core Architecture | Blackfin |
ADSP-BF516KBCZ-4 Overview
It is a kind of electronic component that comes in a package of 168-LFBGA, CSPBGA.Tray is the packaging method provided.In addition to meeting a wide range of requirements, it is a member of Fixed Point.The mounting of the device is done in the direction of Surface Mount.If it is operating at the temperature of 0°C~70°C TA, then it will be operating normally.Voltages can be input or output within 1.8V 2.5V 3.3V's analog voltage range.This digital signal processor is part of the Blackfin? series.The terminations for its uses are 168.A voltage of 1.4V is used as the supply voltage.Pins are available on the 168 component.The configuration of the device includes 168 pins.It is possible to identify numerous related parts using the base part number ADSP-BF516.400MHz is a frequency at which the device operates according to a specific design.On the basis of its specific characteristics, this device can be classified as a Microprocessors device.This device requires a minimum voltage of 1.164V.Devices like this can be powered by voltages up to 7.1V.Using 3.3V as the supply voltage, it operates.Data can be stored in this device's memory in 116kB format.2 UART channels are configured for asynchronous serial communication in which the data format and transmission speeds are configurable.Timers and counters that measure time and count external events are also called 9 timers and counters.The processor core uses the architecture of the Blackfin processor.There are 40 I/Os on the device.
ADSP-BF516KBCZ-4 Features
Supplied in the 168-LFBGA, CSPBGA package
Operating supply voltage of 3.3V
9 timers/counters
40 I/Os
ADSP-BF516KBCZ-4 Applications
There are a lot of Analog Devices Inc. ADSP-BF516KBCZ-4 DSP applications.
- Audio compression
- Seismology
- Biomedical treatment
- Control systems
- Boats
- Receivers
- Biometrics
- Tomography technology
- Audio synthesis
- Biomedical engineering
