ADSP-BF518BSWZ-4F4
| Parameters | |
|---|---|
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 176-LQFP Exposed Pad |
| Number of Pins | 176 |
| Supplier Device Package | 176-LQFP-EP (24x24) |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | Blackfin® |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Type | Fixed Point |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Frequency | 400MHz |
| Base Part Number | ADSP-BF518 |
| Interface | Ethernet, I2C, PPI, RSI, SPI, SPORT, UART/USART |
| Max Supply Voltage | 1.47V |
| Min Supply Voltage | 1.14V |
| Memory Size | 1MB |
| Number of I/O | 40 |
| RAM Size | 48kB |
| Memory Type | FLASH |
| Number of Bits | 32 |
| Data Bus Width | 16b |
| Number of Timers/Counters | 8 |
| Density | 4 Mb |
| Core Architecture | Blackfin |
| Max Frequency | 400MHz |
| Voltage - I/O | 1.8V 2.5V 3.3V |
| Number of UART Channels | 2 |
| Number of PWM Channels | 8 |
| Number of I2C Channels | 2 |
| Non-Volatile Memory | FLASH (4Mbit) |
| Voltage - Core | 1.30V |
| On Chip Data RAM | 116kB |
| Number of SPI Channels | 2 |
| Clock Rate | 400MHz |
| Number of Ethernet Channels | 2 |
| Height | 1.45mm |
| Length | 24.1mm |
| Width | 24.1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADSP-BF518BSWZ-4F4 Overview
The 176-LQFP Exposed Pad package contains these electronic components.Packaging method Tray is provided.Fixed Point's wide range of applications makes it ideal for a wide variety of applications.It is mounted in the direction of Surface Mount as shown in the image below.It is essential that -40°C~85°C TA is kept at a temperature that ensures proper operation of the machine.Voltages can be input or output within 1.8V 2.5V 3.3V's analog voltage range.This digital signal processor is part of the Blackfin? series.The configuration of this board includes 176 pins.Many related parts can be identified by using the ADSP-BF518 part number as a base.Specifically, the device is designed to operate at a frequency of 400MHz.This device requires a minimum voltage of 1.14V.This device can be powered by 1.47V voltages.It can store 1MB data in its memory.2 UART channels are configured for asynchronous serial communication in which the data format and transmission speeds are configurable.Time and external events are measured and counted with 8 timers/counters.The architecture of this processor core is Blackfin.40 I/Os are present on the device.It uses FLASH as its memory type.Operating temperatures should be lower than 85°C.There should be a temperature difference over -40°C during operation.There are 32 information stored in the device.Reliability can be ensured by not exceeding 400MHz.Embedded systems in this system use 2 SPI channels for short-distance communication.In order to establish communication between two or more ICs, 2 I2C channels are used.8 PWM channels are designed to control analog circuits with digital signals.Different types of network cables can be communicated via 2 Ethernet channels.
ADSP-BF518BSWZ-4F4 Features
Supplied in the 176-LQFP Exposed Pad package
8 timers/counters
40 I/Os
ADSP-BF518BSWZ-4F4 Applications
There are a lot of Analog Devices Inc. ADSP-BF518BSWZ-4F4 DSP applications.
- Compression of videos
- Tomography technology
- Radio detection and rangin systems
- Digital camera
- Smart phones
- Seismology
- Streaming music
- Scene analysis technology
- Airplanes
- Automobile electronic gadgets
