ADSP-BF522BBCZ-3A
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 208-FBGA, CSPBGA |
| Number of Pins | 208 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | Blackfin® |
| JESD-609 Code | e1 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 208 |
| Type | Fixed Point |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.8mm |
| Frequency | 400MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADSP-BF522 |
| Pin Count | 208 |
| Operating Supply Voltage | 3.3V |
| Interface | DMA, I2C, PPI, SPI, SPORT, UART |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.7V |
| Memory Size | 132kB |
| Number of I/O | 48 |
| Speed | 300 MHz |
| RAM Size | 32kB |
| Bit Size | 32 |
| Data Bus Width | 16b |
| Number of Timers/Counters | 9 |
| Address Bus Width | 19 |
| Core Architecture | Blackfin |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Voltage - I/O | 1.8V 2.5V 3.3V |
| Number of UART Channels | 2 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | ROM (32kB) |
| Voltage - Core | 1.30V |
| Clock Rate | 300MHz |
| Height Seated (Max) | 1.75mm |
| Length | 17mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADSP-BF522BBCZ-3A Overview
It is a kind of electronic component that comes in a package of 208-FBGA, CSPBGA.It is provided with a packaging way of Tray.In addition to meeting a wide range of requirements, it is a member of Fixed Point.It is mounted in the direction of Surface Mount as shown in the image below.If it is operating at the temperature of -40°C~85°C TA, then it will be operating normally.In analog circuits, the analog voltage range 1.8V 2.5V 3.3V represents the voltage range that is available for input or output.As part of the Blackfin? series, this digital signal processor is included.Its uses have 208 terminations.The voltage supplied by 1.8V is used to operate it.208 component pins are present.The configuration of the device includes 208 pins.The base part number ADSP-BF522 allows identification of a wide range of related parts.This device is designed specifically to operate at frequency 400MHz.It adopts Surface Mount as its mounting way.The specific characteristics of this device can be categoriMicroprocessorsed within the Microprocessors subcategory.It is possible to supply as low a voltage as 1.7V to this device.There is a maximum voltage supply of 3.6V to this device.This device is powered by a voltage of 3.3V.There is a memory on this device that can store 132kB data.Data format and transmission speed can be configured for asynchronous serial communication on 2 UART channels.Count, measure, and measure external events using 9 timers/counters.The architecture of this processor core is Blackfin.48 I/Os are included with the device.
ADSP-BF522BBCZ-3A Features
Supplied in the 208-FBGA, CSPBGA package
Operating supply voltage of 3.3V
9 timers/counters
48 I/Os
ADSP-BF522BBCZ-3A Applications
There are a lot of Analog Devices Inc. ADSP-BF522BBCZ-3A DSP applications.
- Airplanes
- Speech signal processing
- Finite impulse response digital filters
- Seismology
- Radio detection and rangin systems
- Smart camera
- Digital image processing
- Boats
- Computer vision technology
- Instrument modeling
