ADSP-BF523KBCZ-5C2
| Parameters | |
|---|---|
| Base Part Number | ADSP-BF523 |
| Pin Count | 289 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Interface | DMA, I2C, PPI, SPI, SPORT, UART |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.8V |
| Memory Size | 132kB |
| Number of I/O | 48 |
| Speed | 533 MHz |
| RAM Size | 32kB |
| Memory Type | EEPROM, FLASH |
| Number of Bits | 32 |
| Bit Size | 32 |
| Data Bus Width | 16b |
| Number of Timers/Counters | 9 |
| Core Architecture | Blackfin |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Voltage - I/O | 1.8V 2.5V 3.3V |
| Number of UART Channels | 2 |
| Barrel Shifter | NO |
| Internal Bus Architecture | SINGLE |
| Non-Volatile Memory | ROM (32kB) |
| Voltage - Core | 1.10V |
| Number of SPI Channels | 1 |
| Clock Rate | 533MHz |
| Height | 1.2mm |
| Length | 12mm |
| Width | 12mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 289-LFBGA, CSPBGA |
| Number of Pins | 289 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | Blackfin® |
| JESD-609 Code | e1 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 289 |
| Termination | SMD/SMT |
| Type | Fixed Point |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 600MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
ADSP-BF523KBCZ-5C2 Overview
It is a kind of electronic component available in the 289-LFBGA, CSPBGA package.A packaging way of Tray is provided.Due to its Fixed Point membership, it is ideal for a wide range of applications.It is mounted in the way of Surface Mount.As long as it is operated at the temperature of 0°C~70°C TA, it will operate normally.As the name implies, the analog voltage range of 1.8V 2.5V 3.3V refers to the voltage that can be inserted or removed.It is a part of the Blackfin? series of digital signal processors.The uses of this product can be terminated with 289.Using 3.3V as the supply voltage, it operates.289 component pins are present.An overview of its configuration can be found in the section on 289 pins.The base part number ADSP-BF523 allows identification of a wide range of related parts.The device operates at the frequency of 600MHz in accordance with a specific design.In order to mount it, it utiliSurface Mountes the Surface Mount method.On the basis of its specific characteristics, this device can be classified as a Microprocessors device.This device requires a minimum voltage of 1.8V.It is capable of receiving a maximum voltage of 3.6V.It operates with the supply voltage of 3.3V.In its memory, this device can store 132kB data.2 UART channels are configured for asynchronous serial communication in which the data format and transmission speeds are configurable.Timers and counters that measure time and count external events are also called 9 timers and counters.Blackfin architecture is used for this processor core.Device features 48 I/Os.It uses the EEPROM, FLASH memory type.Data is stored in the device in 32 formats.1 SPI channels are used for short-range communication in this embedded system.
ADSP-BF523KBCZ-5C2 Features
Supplied in the 289-LFBGA, CSPBGA package
Operating supply voltage of 3.3V
9 timers/counters
48 I/Os
ADSP-BF523KBCZ-5C2 Applications
There are a lot of Analog Devices Inc. ADSP-BF523KBCZ-5C2 DSP applications.
- Statistical signal processing
- Audio
- Speech signal processing
- Audio compression
- Sonar
- 3D tomography and imaging processing
- Speech processing and recognition
- Consumer electronic gadgets
- Medical imaging
- Smart phones
