ADSP-BF524KBCZ-4C2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 289-LFBGA, CSPBGA |
| Number of Pins | 289 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | Blackfin® |
| JESD-609 Code | e1 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 289 |
| Type | Fixed Point |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 400MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | ADSP-BF524 |
| Pin Count | 289 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Interface | DMA, I2C, PPI, SPI, SPORT, UART, USB |
| Min Supply Voltage | 1.8V |
| Memory Size | 132kB |
| Number of I/O | 48 |
| RAM Size | 32kB |
| Memory Type | FLASH |
| Bit Size | 32 |
| Data Bus Width | 16b |
| Number of Timers/Counters | 9 |
| Core Architecture | Blackfin |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Voltage - I/O | 1.8V 2.5V 3.3V |
| Number of UART Channels | 2 |
| Barrel Shifter | NO |
| Internal Bus Architecture | SINGLE |
| Non-Volatile Memory | ROM (32kB) |
| Voltage - Core | 1.30V |
| On Chip Data RAM | 132kB |
| Height Seated (Max) | 1.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADSP-BF524KBCZ-4C2 Overview
Basically, it is a type of electronic component that is available in a 289-LFBGA, CSPBGA package.Tray is the packaging method provided.In addition to meeting a wide range of requirements, it is a member of Fixed Point.In order to mount it, it must be in the direction of Surface Mount.It is important that the device is operated at a temperature of 0°C~70°C TA in order to ensure its normal functioning.Voltages can be input or output within 1.8V 2.5V 3.3V's analog voltage range.There are several digital signal processors in the Blackfin? series, including this one.289 terminations are available for its use.It operates with the supply voltage of 3.3V.There are pins on the 289 component.In its configuration, it contains 289 pins.Many related parts can be identified by using the ADSP-BF524 part number as a base.To operate at 400MHz frequency, the device has a specific design.It adopts Surface Mount as its mounting way.On the basis of its specific characteristics, this device can be classified as a Microprocessors device.This device requires a minimum voltage of 1.8V.This device is powered by 3.3V's supply voltage.Its memory can store 132kB data.2 UART channels are configured for asynchronous serial communication in which the data format and transmission speeds are configurable.To measure time and count events externally, 9 timers/counters are used.A Blackfin-architecture processor core is used here.Device features 48 I/Os.It uses FLASH as its memory type.
ADSP-BF524KBCZ-4C2 Features
Supplied in the 289-LFBGA, CSPBGA package
Operating supply voltage of 3.3V
9 timers/counters
48 I/Os
ADSP-BF524KBCZ-4C2 Applications
There are a lot of Analog Devices Inc. ADSP-BF524KBCZ-4C2 DSP applications.
- Infinite impulse response filters
- Audio
- Streaming music
- TVs
- Airplanes
- Tomography technology
- Digital camera
- MP3 audio player
- Geophysical processing
- Automobile electronic gadgets
