ADSP-BF525KBCZ-6C2
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 289-LFBGA, CSPBGA |
| Number of Pins | 289 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | Blackfin® |
| JESD-609 Code | e1 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 289 |
| Termination | SMD/SMT |
| Type | Fixed Point |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 600MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADSP-BF525 |
| Pin Count | 289 |
| Operating Supply Voltage | 3.3V |
| Interface | DMA, I2C, PPI, SPI, SPORT, UART, USB |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.8V |
| Memory Size | 132kB |
| Number of I/O | 48 |
| RAM Size | 32kB |
| Number of Bits | 32 |
| Bit Size | 32 |
| Data Bus Width | 16b |
| Number of Timers/Counters | 9 |
| Core Architecture | Blackfin |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Voltage - I/O | 1.8V 2.5V 3.3V |
| Number of UART Channels | 2 |
| Barrel Shifter | NO |
| Internal Bus Architecture | SINGLE |
| Non-Volatile Memory | ROM (32kB) |
| Voltage - Core | 1.10V |
| Height Seated (Max) | 1.4mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADSP-BF525KBCZ-6C2 Overview
It is a kind of electronic component available in the 289-LFBGA, CSPBGA package.Packaging method Tray is provided.Due to its Fixed Point membership, it is ideal for a wide range of applications.It is mounted in the way of Surface Mount.If it is operating at the temperature of 0°C~70°C TA, then it will be operating normally.1.8V 2.5V 3.3V refers to the range of analog voltages that can be input or output.It is a part of the Blackfin? series of digital signal processors.In order to use it, it has 289 terminations.It operates with the supply voltage of 3.3V.The 289 component has pins.289 pins can be found in its configuration.The base part number ADSP-BF525 allows identification of a wide range of related parts.It is specifically designed to operate with the frequency of 600MHz.Mounting is accomplished using Surface Mount.This device can be classified into the subcategory Microprocessors based on its specific characteristics.This device can be powered by voltages as low as 1.8V.A maximum voltage of 3.6V can be provided to this device.In order for it to operate, 3.3V is the supply voltage.There is a memory on this device that can store 132kB data.Data format and transmission speed are configurable on 2 UART channels for asynchronous serial communication.Timer/counters for measuring and counting external events are called 9 timers or counters.It is based on the Blackfin architecture.There are 48 inputs and outputs on the device.In the device are 32 pieces of information.
ADSP-BF525KBCZ-6C2 Features
Supplied in the 289-LFBGA, CSPBGA package
Operating supply voltage of 3.3V
9 timers/counters
48 I/Os
ADSP-BF525KBCZ-6C2 Applications
There are a lot of Analog Devices Inc. ADSP-BF525KBCZ-6C2 DSP applications.
- Smart phones
- Voice recognition
- Infinite impulse response filters
- Biomedical treatment
- Telephone conversations
- Automobile electronic gadgets
- Compression of videos
- Streaming videos
- Smart camera
- Boats
