ADSP-BF526KBCZ-3
| Parameters | |
|---|---|
| Frequency | 400MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADSP-BF526 |
| Pin Count | 289 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Interface | DMA, Ethernet, I2C, PPI, SPI, SPORT, UART, USB |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.7V |
| Memory Size | 132kB |
| Number of I/O | 48 |
| Speed | 300 MHz |
| RAM Size | 32kB |
| Bit Size | 32 |
| Data Bus Width | 16b |
| Number of Timers/Counters | 9 |
| Address Bus Width | 19 |
| Core Architecture | Blackfin |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Voltage - I/O | 1.8V 2.5V 3.3V |
| Number of UART Channels | 2 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | ROM (32kB) |
| Voltage - Core | 1.30V |
| Clock Rate | 300MHz |
| Height Seated (Max) | 1.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 289-LFBGA, CSPBGA |
| Number of Pins | 289 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tray |
| Series | Blackfin® |
| JESD-609 Code | e1 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 289 |
| Type | Fixed Point |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.8V |
| Terminal Pitch | 0.5mm |
ADSP-BF526KBCZ-3 Overview
Basically, it is a type of electronic component that is available in a 289-LFBGA, CSPBGA package.Packaging way Tray is provided.As a member of Fixed Point, it is ideally suitable for a wide range of applications.Surface Mount is mounted in a manner that allows it to be moved.As long as it is operated at the temperature of 0°C~70°C TA, it will operate normally.It refers to the analog voltage range of 1.8V 2.5V 3.3V that may be input or output.There are several digital signal processors in the Blackfin? series, including this one.The terminations for its uses are 289.It is supplied with voltage by 1.8V.The 289 component has pins.An overview of its configuration can be found in the section on 289 pins.By using its base part number of ADSP-BF526, many related parts can be identified.The device is specifically designed to operate at the frequency of 400MHz.Using Surface Mount as a mounting method, it is mounted.The device can be classified under the subcategory Microprocessors based on its specific characteristics.This device can be powered by voltages as low as 1.7V.It is capable of receiving a maximum voltage of 3.6V.A voltage of 3.3V is used as the supply voltage.132kB data can be stored in the memory of this device.Data formats and transmission speeds are configurable for 2 UART channels used for asynchronous serial communication.Count, measure, and measure external events using 9 timers/counters.Processor core Blackfin adopts the Blackfin architecture.It is equipped with 48 I/Os.
ADSP-BF526KBCZ-3 Features
Supplied in the 289-LFBGA, CSPBGA package
Operating supply voltage of 3.3V
9 timers/counters
48 I/Os
ADSP-BF526KBCZ-3 Applications
There are a lot of Analog Devices Inc. ADSP-BF526KBCZ-3 DSP applications.
- 3D tomography and imaging processing
- Processing system
- Automatic analysis system of EEG or ECG
- Audio
- Vehicle electronics
- Compression of videos
- Digital image processing
- Automobile electronic gadgets
- Radio detection and rangin systems
- Other sensor array processing
