ADSP-BF532SBSTZ400
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 176-LQFP |
| Number of Pins | 176 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | Blackfin® |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 176 |
| Type | Fixed Point |
| Additional Feature | ALSO REQUIRES 3V OR 3.3V SUPPLY |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.5mm |
| Frequency | 400MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADSP-BF532 |
| Pin Count | 176 |
| Interface | SPI, SSP, UART |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 800mV |
| Memory Size | 84kB |
| RAM Size | 32kB |
| Memory Type | ROM, SRAM |
| Bit Size | 32 |
| Data Bus Width | 16b |
| Number of Timers/Counters | 4 |
| Core Architecture | Blackfin |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Number of Programmable I/O | 16 |
| Voltage - I/O | 3.30V |
| Number of UART Channels | 1 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | ROM (1kB) |
| Voltage - Core | 1.20V |
| Height | 1.4mm |
| Length | 24mm |
| Width | 24mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADSP-BF532SBSTZ400 Overview
It is a type of electronic component available in package 176-LQFP.Packaging method Tray is provided.The fact that it belongs to the Fixed Point family means that it can be applied to a wide range of applications.There is a mounting point for it along the direction of Surface Mount.By operating the device at the temperature of -40°C~85°C TA, a normal operation is ensured.3.30V refers to the range of analog voltages that can be input or output.This digital signal processor is included into the Blackfin? series.The uses of this product can be terminated with 176.The supply voltage is 1.2V.Pins are available on the 176 component.There are 176 pins in its configuration.There are a number of related parts that can be identified using the base part number ADSP-BF532.It is specifically designed to operate with the frequency of 400MHz.Using Surface Mount as a mounting method, it is mounted.According to its specific characteristics, this device is classified in the subcategory Microprocessors.It is possible to supply as low a voltage as 800mV to this device.3.6V is the maximum voltage that can be supplied to this device.Its memory can be used to store 84kB data.The 1 UART channels support asynchronous serial communication in which data formats and transmission speeds are configurable.With this electronic part, additional features of ALSO REQUIRES 3V OR 3.3V SUPPLY can also be provided.Count, measure, and measure external events using 4 timers/counters.This processor core adopts the architecture of Blackfin.The memory type it uses is ROM, SRAM.To transmit data, there are 16 programmable I/Os.
ADSP-BF532SBSTZ400 Features
Supplied in the 176-LQFP package
4 timers/counters
ADSP-BF532SBSTZ400 Applications
There are a lot of Analog Devices Inc. ADSP-BF532SBSTZ400 DSP applications.
- Dam design
- Vibration signal processing
- Infinite impulse response filters
- Tomography technology
- Audio compression
- Fourier transform
- Medical imaging
- Audio signal
- Computers and laptop
- Financial signals
