ADSP-BF533SBBCZ-5V
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 160-LFBGA, CSPBGA |
| Number of Pins | 160 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | Blackfin® |
| JESD-609 Code | e1 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 160 |
| Type | Fixed Point |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.25V |
| Terminal Pitch | 0.8mm |
| Frequency | 600MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADSP-BF533 |
| Pin Count | 160 |
| Qualification Status | Not Qualified |
| Interface | SPI, SSP, UART |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 800mV |
| Memory Size | 148kB |
| Number of I/O | 16 |
| RAM Size | 64kB |
| Memory Type | ROM |
| Bit Size | 32 |
| Data Bus Width | 16b |
| Number of Timers/Counters | 4 |
| Core Architecture | Blackfin |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Voltage - I/O | 3.30V |
| Number of PWM Channels | 3 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | ROM (1kB) |
| Voltage - Core | 1.20V |
| Number of SPI Channels | 1 |
| Clock Rate | 533MHz |
| Height | 1.31mm |
| Length | 12.1mm |
| Width | 12.1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADSP-BF533SBBCZ-5V Overview
This is an electronic component with a 160-LFBGA, CSPBGA package.Packaging method Tray is provided.Fixed Point members are well suited for a wide range of applications.The machine is mounted in the way of Surface Mount in order to facilitate its operation.At the temperature of -40°C~85°C TA, the device is guaranteed to operate normally.The analog voltage range of 3.30V refers to the voltage that can be input or ouput.There are several digital signal processors in the Blackfin? series, including this one.160 terminations are available for its use.1.25V is the supply voltage.Pins are located on the 160 component.The configuration of this board includes 160 pins.The base part number ADSP-BF533 allows identification of a wide range of related parts.The device is specifically designed to operate at the frequency of 600MHz.A Surface Mount mounting method is used for its mounting.The device can be classified as part of the Microprocessors subcategory based on its specific characteristics.This device requires a minimum voltage of 800mV.The maximum voltage supplied to this device amounts to 3.6V.It can store 148kB data in its memory.To measure time and count events externally, 4 timers/counters are used.The architecture of this processor core is Blackfin.The device is equipped with 16 I/Os.A ROM memory type is used.To communicate over short distances, this embedded system uses 1 SPI channels.Digital circuits are controlled with 3 PWM channels.
ADSP-BF533SBBCZ-5V Features
Supplied in the 160-LFBGA, CSPBGA package
4 timers/counters
16 I/Os
ADSP-BF533SBBCZ-5V Applications
There are a lot of Analog Devices Inc. ADSP-BF533SBBCZ-5V DSP applications.
- Automatic analysis system of EEG or ECG
- Remote sensing image processing technology
- Statistical signal processing
- Financial signals
- Automobile electronic gadgets
- Geoscience signal processing
- Finite impulse response digital filters
- Compression of videos
- Computers and laptop
- Speech processing
