ADSP-BF533SBBCZ400
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 160-LFBGA, CSPBGA |
| Number of Pins | 160 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | Blackfin® |
| JESD-609 Code | e1 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 160 |
| Type | Fixed Point |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.8mm |
| Frequency | 400MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | ADSP-BF533 |
| Pin Count | 160 |
| Interface | SPI, SSP, UART |
| Max Supply Voltage | 1.45V |
| Min Supply Voltage | 800mV |
| Memory Size | 148kB |
| Number of I/O | 16 |
| RAM Size | 64kB |
| Memory Type | ROM |
| Bit Size | 32 |
| Data Bus Width | 16b |
| Number of Timers/Counters | 4 |
| Core Architecture | Blackfin |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Voltage - I/O | 3.30V |
| Number of PWM Channels | 3 |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | ROM (1kB) |
| Voltage - Core | 1.20V |
| Number of SPI Channels | 1 |
| Height | 1.31mm |
| Length | 12.1mm |
| Width | 12.1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADSP-BF533SBBCZ400 Overview
It is a type of electronic component available in package 160-LFBGA, CSPBGA.Packaging is provided in the form of Tray.Due to its membership in Fixed Point, it is ideally suited for a wide range of uses.The mounting of the device is done in the direction of Surface Mount.It is recommended that the device operate at a temperature of -40°C~85°C TA to ensure its normal operation.In analog circuits, the analog voltage range 3.30V represents the voltage range that is available for input or output.This digital signal processor is part of the Blackfin? series.160 terminations are available for its use.This device is powered by 1.2V's supply voltage.The 160 component has pins.In its configuration, 160 pins can be found.Based on its base part number of ADSP-BF533, many ralated parts can be found.It is specifically designed to operate with the frequency of 400MHz.A Surface Mount mounting method is used for its mounting.This device can be classified into the subcategory Microprocessors based on its specific characteristics.This device can be powered by voltages as low as 800mV.1.45V is the maximum voltage that can be supplied to this device.Its memory is capable of storing 148kB data.External events are tracked and measured with 4 timers/counters.Blackfin architecture is used for this processor core.The device is equipped with 16 I/Os.As far as memory type is concerned, it uses ROM.For short-distance communication, 1 SPI channels are used.3 PWM channels are designed to control analog circuits with digital signals.
ADSP-BF533SBBCZ400 Features
Supplied in the 160-LFBGA, CSPBGA package
4 timers/counters
16 I/Os
ADSP-BF533SBBCZ400 Applications
There are a lot of Analog Devices Inc. ADSP-BF533SBBCZ400 DSP applications.
- Streaming videos
- Biometrics
- Spectral density estimation
- Speech signal processing
- Biomedical treatment
- Streaming music
- Machinery and equipment
- Computer vision technology
- Smart phones
- Vehicle electronics
