ADSP-BF533SBBCZ500
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 160-LFBGA, CSPBGA |
| Number of Pins | 160 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | Blackfin® |
| JESD-609 Code | e1 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 160 |
| Termination | SMD/SMT |
| Type | Fixed Point |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Additional Feature | ALSO REQUIRES 3V OR 3.3V SUPPLY |
| Subcategory | Microprocessors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 1.2V |
| Terminal Pitch | 0.8mm |
| Frequency | 500MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | ADSP-BF533 |
| Pin Count | 160 |
| Interface | SPI, SSP, UART |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 800mV |
| Memory Size | 148kB |
| RAM Size | 148kB |
| Memory Type | SRAM |
| Bit Size | 32 |
| Data Bus Width | 16b |
| Number of Timers/Counters | 5 |
| Address Bus Width | 19b |
| Core Architecture | Blackfin |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Number of Programmable I/O | 16 |
| Voltage - I/O | 3.30V |
| Number of UART Channels | 1 |
| Max Junction Temperature (Tj) | 105°C |
| Barrel Shifter | YES |
| Internal Bus Architecture | MULTIPLE |
| Non-Volatile Memory | ROM (1kB) |
| Ambient Temperature Range High | 85°C |
| Voltage - Core | 1.20V |
| Height | 1.7mm |
| Length | 12mm |
| Width | 12mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Contains Lead |
ADSP-BF533SBBCZ500 Overview
This is an electronic component with a 160-LFBGA, CSPBGA package.Tray is the packaging method provided.As a member of Fixed Point, it is ideally suitable for a wide range of applications.The device is attached in a way that faces Surface Mount.At the temperature of -40°C~85°C TA, the device is guaranteed to operate normally.It refers to the analog voltage range of 3.30V that may be input or output.This digital signal processor is included into the Blackfin? series.The terminations for its uses are 160.Using 1.2V as the supply voltage, it operates.In this component, there are pins for 160.Its configuration includes 160 pins.Based on its base part number of ADSP-BF533, many ralated parts can be found.The device is specifically designed to operate at the frequency of 500MHz.As a mounting method, it uses Surface Mount.The device can be classified as part of the Microprocessors subcategory based on its specific characteristics.The minimum voltage supplied to this device is as low as 800mV.It is capable of receiving a maximum voltage of 3.6V.This device is able to store 148kB data in its memory.In 1 UART channels, the data format and transmission speeds may be customi1ed for asynchronous serial communication.By using this electronic part, ALSO REQUIRES 3V OR 3.3V SUPPLY can be enhanced with additional features.Timer/counters with a 5-axis measure time and count external events.Blackfin architecture is used for this processor core.The memory type it uses is SRAM.A 16 programmable I/O is used for data transmission.
ADSP-BF533SBBCZ500 Features
Supplied in the 160-LFBGA, CSPBGA package
5 timers/counters
ADSP-BF533SBBCZ500 Applications
There are a lot of Analog Devices Inc. ADSP-BF533SBBCZ500 DSP applications.
- Digital image processing, data compression
- Telephone conversations
- Vibration signal processing
- Tomography technology
- Boats
- Tomography technology
- Signal processing for telecommunications
- Automobile electronic gadgets
- MP3 audio player
- Fourier transform
